150
MNV 4645
CZ
ERROR MASSAGE
In case of failure, the display shows the error code.
Code
Description of error
Possible cause
E1
Filling the dishwasher with water takes
too long.
Check the water supply (tap is not opened, the water supply is
limited, water pressure is too low).
E3
Dishwasher does not reach the set
temperature.
Heating element malfunction.
E4
Dishwasher is overflowing
Too much inflowing water. Check the water supply pressure.
E8
Water inlet valve malfunction
Contact a qualified expert or a service.
E9
Button pressed for more than 30 seconds There is a problem with the water supply, or a defective button.
Note:
• In case of overflowing turn off the main water supply and then contact the service.
• Before restarting the appliance, remove the excess water from the interior of the appliance.
DIMENSIONS
EN
