57
LKV5260
EN
CLEANING AND MAINTENANCE
•
Disconnect the power cord from the wall outlet or switch off the circuit breaker of the appliance before cleaning
and maintenance.
•
The inside of the refrigerator should be cleaned according to the frequency of use to avoid unpleasant odours.
•
One source of odour can also be dirt deposits around the sealing. Regular cleaning with a damp cloth prevents
these unpleasant odours.
•
For cleaning, we recommend using non-aggressive products, preferably clear lukewarm water along with a soft
sponge or paper towel.
•
Let the appliance open to dry out naturally after cleaning.
•
For cleaning, we do not recommend cleaning agents such as alcohol, acetone, oil, toothpaste or any other abrasive
products.
•
We do not recommend using coarse sponges or steel brushes.
•
We do not recommend using boiling water as it may cause damage to individual parts of the appliance.
•
We do not recommend cleaning the appliance with a stream of water that could interfere with the insulation or
cause a short circuit of some electronic components of the appliance.
•
Clean all the accessories of the appliance with a solution of lukewarm water and a detergent. Never wash the
accessories in a dishwasher!
Defrosting
The freezer defrosts automatically during operation. During defrosting, water accumulates at the back of the
appliance in the evaporation container, where it evaporates spontaneously.
INSTALLATION OF THE APPLIANCE
•
Defects caused by improper installation are not covered by the warranty.
•
Installation is the responsibility of the customer not the manufacturer.
•
The manufacturer bears no responsibility for damage caused to people, animals or property due to incorrect
installation.
•
Do not place the appliance under the direct sun shine.
•
Placing the appliance into suitable furniture ensures its proper functionality.
•
The appliance is installed in standardized kitchen furniture designed for built-in appliances or in properly adapted
furniture of dimensions according to Fig. 1. The dimensions in the table are given in mm.
•
Ensure that sufficient ventilation is provided as shown in Fig. 2.
•
Change the door swing direction if necessary.
Connection to the mains
•
Make sure the mains voltage and current protection correspond to the values on the rating plate of the appliance.
We recommend using a separate outlet with a 16 A circuit breaker.
•
Only use grounded sockets.
•
Do not use multiple sockets, plugs and extension cords. There is a risk of overheating.
•
The plug of the power cord on the appliance must be freely accessible even after the installation.
•
Changes in a connection may only be performed by a qualified professional.
•
Electrical safety of the appliance can be guaranteed only if the protective terminal of the appliance is connected to
the protective conductor of the mains.
•
The manufacturer bears no responsibility for damage to persons or property as a result of missing or bad protective
connection.
•
The power cord must be positioned in a way that it is not deformed or excessively bent.
Summary of Contents for LKV5260
Page 2: ...2 LKV5260 CZ...
Page 63: ......
