Concept2 LK5455ss, Manual

Page: 72 / 76

The light inside the
refrigerator does not
light up
The power cord plug is not plugged in the
wall outlet.
Check the connection of the cord.
The light in the refrigerator is damaged Contact an authorized service centre.
There is too much
water in the
evaporator container
The door of the refrigerator is not
completely closed
Make sure that the door of the refrigerator
is closed and that there is no food or
containers that could keep the door from
closing properly.
Inside the refrigerator there is food that
contains too much water - constant
defrosting
Reduce the amount of food in the
refrigerator that contains too much water.
A frost deposit forms
inside the freezer.
Insufficiently packaged food or wet
containers
Ensure that the food packaging is not
damaged or that the containers are dry
before placing them in the freezer.
Door gets opened too frequently Do not open the door so often.
Incorrectly placed compartments in the
freezer Check that the freezer compartments are
properly placed.
The door sealing is damaged or worn out Contact an authorized service centre.
ERROR MESSAGE
In case of failure, the display shows the error code.
Error Code Description Remedy
LED1, LED6 is flashing Refrigerator temperature sensor failure
Contact an authorized
service centre.
LED1, LED3 is flashing Freezer temperature sensor failure
Contact an authorized
service centre.
LED1, LED5 is flashing Defrost sensor failure
Contact an authorized
service centre.
LED1, LED4 is flashing Ambient temperature is too high/low
Decrease/increase the
ambient temperature.