Concept2 LK3360ss, Manual

Page: 74 / 82

74
EN
LK3360ss / LK3360wh
CHANGING THE DOOR SWING DIRECTION
1. Switch off the circuit breaker or remove the plug from the wall outlet. When disconnecting the unit from the
wall outlet, never pull the power cord, grasp the plug end and disconnect it by removing it from the receptacle.
2. If you have any food and drinks in the refrigerator door compartments, remove them.
3. Remove the upper plastic covers, the upper hinge of the refrigerator (Fig. 2). Remove the refrigerator door and
place it in a safe place.
4. Remove the blind plugs and the middle hinge of the refrigerator (Fig. 3). Remove the freezer door and place it in
a safe place.
5. Remove the blind plugs and the bottom hinges of the freezer (Fig. 4).
6. Move the pin for fixing the freezer door to the other side of the freezer bottom hinge (Fig. 5). Install the freezer
bottom hinge on the other bottom side of the unit as shown in Fig. 5.
7. Remove the upper plastic cover from the upper edge of the refrigerator door (Fig. 7).
8. Remove the housing for fixing the upper refrigerator hinge and place it on the other side of the door (Fig. 7). After
moving the housing, place the upper plastic cover back.
9. Remove the plastic door stop, the metal holder, and the shaft housing for fixing the middle hinge of the
refrigerator from the bottom edge of the refrigerator door (Fig. 5).
Fig.3
Fig. 2
Upper hinge cover
Upper hinge
Hole plug
Blind
Middle hinge
Screw
Screw
Sticker
Sticker