49
LA7383ss
EN
CONNECTION TO THE MAINS
•
Make sure the mains voltage and current protection correspond to the values on the rating plate of the appliance.
We recommend using a separate outlet with a 10 A circuit breaker.
•
Only use grounded sockets.
•
Do not use multiple sockets, plugs and extension cords. There is a risk of overheating.
•
The plug of the power cord on the appliance must be freely accessible even after the installation.
•
Changes in a connection may only be performed by a qualified professional.
•
Electrical safety of the appliance can be guaranteed only if the protective terminal of the appliance is connected to
the protective conductor of the mains.
•
The manufacturer bears no responsibility for damage to persons or property as a result of missing or bad protective
connection.
•
The power cord must be positioned in a way that it is not deformed or excessively bent.
CLEANING AND MAINTENANCE
•
Disconnect the power cord from the wall outlet or switch off the circuit breaker of the appliance before cleaning
and maintenance.
•
Dust and dirt on the appliance on the wall and on the ground should be regularly cleaned for trouble-free operation
and energy savings.
•
The inside of the refrigerator should be cleaned according to the frequency of use to avoid unpleasant odours.
•
One source of odour can also be dirt deposits around the sealing. Regular cleaning with a damp cloth prevents
these unpleasant odours.
•
For cleaning, we recommend using non-aggressive products, preferably clear lukewarm water along with a soft
sponge or paper towel.
•
When the cleaning is done, let the appliance open to dry out naturally.
•
For cleaning, we do not recommend cleaning agents such as alcohol, acetone, oil, toothpaste or any other abrasive
products.
•
We do not recommend rough brushes, hard wipes or steel brushes.
•
We do not recommend using boiling water as it may cause damage to the appliance.
•
We do not recommend cleaning the appliance with a stream of water that could interfere with the insulation or
cause a short circuit of some electronic components of the appliance.
Note
: The magnetic door strip is electrically heated to prevent water condensing on it. Water condensing is a normal
phenomenon that does not affect the refrigeration functionality.
INSTALLATION OF THE APPLIANCE
• Defects caused by improper installation are not covered by the warranty.
•
Installation is the responsibility of the customer not the manufacturer.
•
The manufacturer bears no responsibility for damage caused to people, animals or property due to incorrect
installation.
•
Place the appliance on a flat place in a well-ventilated are.
•
Do not place the appliance under the direct sun shine.
•
The appliance should be placed at least 10 cm from the wall at the back and both sides. There should be a free space
of approximately 30 cm above the appliance as it needs to ventilate freely.
•
If necessary, use the adjustable feet at the bottom of the appliance to align the appliance in a horizontally stable
position.
