Concept2 IDV4560bf, Manual

Page: 88 / 98

88
EN
IDV4560bf
Note:
•
If the induction hob is switched off while the child lock function is activated, the control panel lock is active even
after the induction hob has been switched off. In this case the child lock is activated when the induction hob is
switched on and the “
Lo ” symbol is displayed on the control panel.
• For unlocking the control panel press and hold the symbol for activation/deactivation of the child lock (5) until the
acoustic sound goes off. The “
Lo ” symbol disappears and the control panel is active again.
Setting the cooking time (timer function)
This function can be set only when the cooking zone has not been selected.
1. While cooking, press the to set the timer (1). The number “
10 ” will be displayed and will start to flash.
2. Press or slide your finger on the slider (3) to gradually set the time to 1-95. After the first press of the timer setting
symbol, set the individual minutes, after the second press set the tens of minutes.After the cooking time is set, the
time set will be flashing on the display for 5 seconds.
3. After this time, the set cooking time begins to count down.
4. After the set cooking time has elapsed, the “
- - ” symbol appears on the display above the timer setting buttons (3)
and acoustic sounds will be heard for 30 seconds.
Delayed shut down function of one cooking zone
The delayed shut down function can be used for all the cooking zones of the induction hob. For each cooking zone,
different delay times can be set.
1. For the selected cooking zone for which you want to use the delayed shut down function, on the control panel (6)
press the "+" or "-" button during cooking.
2. On the control panel (6), press the "+" button for setting the timer (3). The number “ 10 ” will be displayed and will
start to flash.
3. By pressing the “+” or “-” button for setting the timer (3) you can set the delayed shut down function of the selected
cooking zone.
Note: Press the "+" or "-" button to increase or decrease the delayed shut down time by 1 minute. Press and hold
the "+" or "-" button to increase or decrease the delayed shut down time by 10 minutes.
4. After the delayed shut down time is set, the time set will be flashing on the display for 5 seconds. After this time,
the delayed shut down time will count down, and a dot in the lower right corner will flash in addition to the
selected power level of the selected cooking zone.
5. To cancel the delayed shut down time, on the control panel (6) press the "+" and "-" buttons for setting the timer
(2) simultaneously. The number “ 00 ” will be displayed.
6. After the set delayed shut down time has elapsed, the “
- -
” symbol appears on the display above the timer setting
buttons (2) and the selected cooking zone, for which the delayed shut down was set, will shut down automatically.
Delayed shut down function for multiple cooking zones
To set the delayed shut down for multiple cooking zones, proceed as in setting the delayed shut down of one cooking
zone.
1. For the selected cooking zone for which you want to use the delayed shut down function, press the "+" or "-"
button during cooking on the control panel (6).
2. On the control panel (6), press the "+" button for setting the timer (3). The number “ 10 ” will be displayed and will
start to flash.
3. By pressing the “+” or “-” symbol for setting the timer (3) you can set the delayed shut down function of the
selected cooking zone.
Note:
Press the "+" or "-" button to increase or decrease the delayed shut down time by 1 minute. Press and hold
the "+" or "-" button to increase or decrease the delayed shut down time by 10 minutes.
4. After the delayed shut down time is set, the time set will be flashing on the display for 5 seconds. After this time,
the delayed shut down time will count down, and a dot in the lower right corner will flash in addition to the
selected power level of the selected cooking zone.
5. To set a delayed shut down of another cooking zone, follow the same procedure as described above.