56
EN
IDV2560
• To ensure the correct function of the unit, place it in suitable furniture.
• The unit should be installed in standardised kitchen furniture designed for built-in appliances or in properly adapted
furniture of dimensions according to Fig. 1 and 2.
• The kitchen furniture must be made of sufficiently heat-resistant material. The materials and adhesives used must be
resistant to heating of the unit according to standard ČSN EN 60335-2-6. Materials and adhesives that do not meet
the stated standard may deform or loosen.
Follow the installation instructions:
1. Remove all the covering and marketing materials from the unit before the first use. Install the heating plate in a cut-
out in the worktop of a minimum thickness of 38 – 40 mm, with the surface covered with a heat-resistant material.
The worktop must be installed horizontally and at the wall it must be sealed against leaking liquids. Ovens, the
combustion products of which could flow up under the heating plate, cannot be installed under the heating plate
without taking special measures.
2. The required dimensions of the built-in hole in the worktop are on Fig. 1. Leave at least a 50 mm gap between the
heating plate and the surrounding objects and boxes at both sides of the heating plate. Leave at least 50 mm free
behind the heating plate.
3. We recommend installing a vapour absorber above the heating plate; a top box can be located above it. The
minimum distance of the vapour absorber above the heating plate is 600 mm. Install a separate box without the
vapour absorber min. 760 mm above the heating plate.
4. For installation use a worktop with a thickness of 38 – 40 mm.
5. For effective air circulation, the unit must be installed according to the dimensions in Fig. 2. The box shall be
designed so that air can flow in its bottom part. A gap of at least 50 mm shall be below the heating plate and at
least 50 mm behind the rear wall of the box.
Fig. 1
