EN
44
ETV4560
c) Setting of the delayed start and end of baking
1. Press the Programming Cooking Time (K) two times to activate the timer mode. The time is flashing. Use the Timer
decreasing Key (I) and Timer increasing Key (L) to set on the display the required hours
2. Press the Programming Cooking Time (K) again. Use the Timer decreasing Key (I) and Timer increasing Key (L) to set
on the display the required minutes
3. Press the (K) two times to activate Programming Delay Cooking Time (N). Use the Timer decreasing Key (I) and Timer
increasing Key (L) to set on the display the required hours
4. Press the Programming Delay Cooking Time (N) again. Use the Timer decreasing Key (I) and Timer increasing Key (L)
to set on the display the required minutes
5. Confirm the settings by pressing the Programming Delay Cooking Time (N). The symbol „:“ is flashing and the oven will
start counting down. The time is counted down in minutes.
6. After the set-time of delay you will hear a grep and oven starts to bake.
7. After the set time of baking the oven is turned off and you will hear a beep 7 times. The display will showthe current
day time.
d) Telescopic rails
The unit is equipped with 2 pairs of telescopic rails that allow withdrawing the baking pans, thus making access easier
when putting in and taking out the baking pans, or when checking the baked food. (Fig. 2, 3)
WARNING!
The telescopic rails get very hot during the operation. There is a risk of burning yourself!
When putting the baking pans in, place them on the protrusions at the ends of the rails (Fig. 4).
Fig. 2
Fig. 3
Fig. 4
