47
LA8990ss
EN
Display
The display lights for 3 seconds, when the appliance is connected to the mains. After that, a beep sound occurs and the
display switches splayed in operation mode. In operation mode, the actual set temperature of each zone is displayed.
Default temperatures for the individual zone are pre-set at 5 °C / -18 °C / -18 °C.
If an error occurs, the error code will be shown on the display. If the door does not get open opened and any other
activity is not done within 30 seconds, the control panel gets locked. After another 30 seconds of inactivity, the display
goes off completely. The display lights up again when any of the buttons on the control panel is pressed or the door
is opened.
TIPS FOR USE
•
We do not recommend putting hot food or fluids that are still evaporating inside the refrigerator. It will increase the
humidity inside the refrigerator.
•
Food intended for refrigerating should be wrapped or covered. It is recommended to use plastic bags, kitchen foil
or food paper to wrap food. Liquids should be stored in closed containers or bottles.
•
It is also not recommended to put beverages in glass bottles in the freezer, glass can easily rupture due to low
temperatures inside the freezer.
USER'S MANUAL
Before first use
Before first use you should wipe the outside and inside of the appliance with a damp cloth for hygiene reasons. Wash
all removable parts with warm soapy water.
After installing the refrigerator, leave the appliance standstill for at least 4 hours before connecting to the mains. It is
necessary to allow the cooling gases to set down. Then you can connect the refrigerator to the mains and let it run for
2-3 hours to stabilize a normal operating temperature. Then put fresh or frozen food inside the appliance.
Note
: If a power failure occurs during the first run, wait for at least 5 minutes before switching on again or connecting
to the mains.
Setting the Temperature of Refrigerator Zone
•
Press and hold the sensor button (E) for 3 seconds to unlock the control panel.
•
Use the sensor button (A) to adjust the temperature inside the refrigerator by 1 °C steps.
•
The temperature of the refrigerator zone can be set between 2 and 8 °C.
Setting the Temperature of Freezer Zone
•
Press and hold the sensor button (E) for 3 seconds to unlock the control panel.
•
Use the sensor button (C) to adjust the temperature inside the freezer by 1 °C steps.
•
The temperature of the freezer zone can be set between -16 and -24 °C.
Setting the Temperature of the Variable Zone
•
Press and hold the sensor button (E) for 3 seconds to unlock the control panel.
•
Use the sensor button (B) to adjust the temperature of the variable zone by 1 °C steps.
•
The temperature of the variable zone can be set between -18 and 7 °C.
•
To completely switch off the variable zone, hold the sensor button (B) for 5 seconds. "--" appears
on the display (3) and the icon (2) lights up.
•
To switch on the variable zone, hold the sensor button (B) for 5 seconds. The temperature
in the variable zone will be automatically set to 0 °C and the icon (2) will go out.