AHD CAMERA QUICK START GUIDE
3. Configuring the Camera
Connection
- Connect the video output to a video cable running to the recorder/monitor.
- Check the power supply is of the correct level and connect the power supply to the
camera power input.
- View the picture on a monitoring device to check the power and video connection is
properly working.
- To assist in installation when using an analogue test monitor, the camera can be switched
to an analogue output by modifying the DIP switch to the position depicted below.
- The camera can be returned to AHD output by modifying the DIP switch to the position
depicted below.
Built-in Control Board Functions
1. On-screen Display (OSD) Button
➔
L — Navigate left in OSD menu.
➔
R — Navigate right in OSD menu.
➔
U — Navigate up in OSD menu.
➔
D — Navigate down in OSD menu.
➔
ENTER — Open OSD menu/select item.
PSU
