IP HIGH SPEED DOME SERIES QUICK START GUIDE
1
WHAT’S IN THE BOX?
Packaging Contents
Speed Dome Camera x1
9-Pin Terminal Block x 1
Quick Start Guide x1
Bracket x1
Screw & Plastic Anchor x 4
Rubber Mounting Plate x1
Hex Key x 1
Mounting Template x 1
User Manual USB x1
Audio and Video Cable x1
2
INSTALLATION
Install the Speed Dome Camera in 3 Steps
1.
Use the mounting template sheet to drill holes in the mounting surface, then affix
the included bracket to the surface
2. Connect the safety lanyard between the camera and bracket, then connect all
required cables to the camera
3.
Line up the camera into the bracket and tighten the fixing screws.
3
SURFACE MOUNT INSTALLATION
Note:
For other bracket mounting instructions, see installation instructions in the manual.
Drill Mounting
Holes in the Ceiling
Rubber Gasket
Connect Cables
and Terminal Block
Affix the Main Body
Remove the Protective Film
Template Sheet
Affix the mounting base
