Concept Pro AIR2024-AHD Series, User Manual

Page: 4 / 12

INSTALLATION
Important: Ensure all precautions are observed during installation.
It is recommended the camera is tested during the most demanding environmental conditions
such as low light or bright sunlight to ensure continuity of effective CCTV monitoring. You may
find the use of an ND filter helpful.
l
Use the supplied mounting template to mark the spacing for drilling.
l
Following drilling, securely attach the bracket and camera to the wall.
Remove the camera unit carefully from the box,and keep the accessories in a safe place.
FIXING TO A WALL
DRAWING TEMPLATE
CONNECTION
l
l
l
Connect the video output to your monitor.
Check the power supply is correct and
connect it to the power port on the Camera.
View the picture on your monitor to check
the power and video connections are
working properly.
l
l
To assist in installation when using an
analogue test monitor, the camera can be
switched to an analogue output by pushing
the joystick fully up for several seconds.
The camera can be returned to AHD output
by pushing the joystick fully left for several
seconds.
PSU
Troubleshooting
l
Ensure all connections to the Camera and DVR / Monitor are correct.
l
If a picture still cannot be obtained please contact your supplier for technical support.