background image

7

General Safety Instruction

• 

During operation keep away from rotating parts and PTO shaft, do not 

remove safety guards during operation or with the engine running.

•  Servicing should be carried out with the engine stopped, the brakes applied 

and locked and the started key removed. Once the machine is raised do not 

work underneath unless supported securely.

•  When travelling on the public road disconnect the PTO shaft and carefully 

follow the traffi  c regulations of your country.

• 

Always lift the machine from the lifting points.

•  The operator should be experienced and in good health in order to avoid 

injury to his person and others.

• 

The operator must wear the correct safety garments.

•  Do not work when dark unless suitable lighting is available

Operator’s Prerequisites

To avoid danger to himself and others, the operator must be:

• 

Physically sound

• 

Mentally sound

• 

Trained

We advise that the operator read and understand this booklet before using 

the machinery. If there are any doubts then contact your dealer or 

CONCEPT 

PERUGINI 

S.R.L

Work Clothing

The operator must wear the following:

•  Working gloves

•  Overalls of appropriate size

• 

Working boots

•  Protective glasses

•  Protective helmet

When lifting the machine always use the appropriate lifting gear 

and always use the lifting points indicated by the yellow and black 

stickers as shown in picture.

Summary of Contents for AT 140

















Reviews: