5.29
IR-Link type CP 70A
IR-Link type CP 70A
Functional principle of IR-Link typ CP 70A
Control options with IR-Link
Terminals
(low current)
Terminal B
+
Plus 24V DC
C
-
Minus (-)
D
D
Preamplifier input 1
E
E
P
input 2
F
F
P
input 3
G
G
P
input 4
H
H
P
input 5
I
I
P
input 6
K
K
P
input 7
L
L
P
input 8
Terminal
Symbol
Input
Terminal
Terminal
Terminal
reamplifier
Terminal
reamplifier
Terminal
reamplifier
Terminal
reamplifier
Terminal
reamplifier
Terminal
reamplifier
Terminal
reamplifier
EAN-No. 5703513006303
Technical data IR-Link type CP 70A:
Low current
Voltage
24V DC (18-28V)
Current at 18 V DC max.
30 mA
Power consumption at 18 V DC max.
0,5 VA
Power consumption pr. preamplifier
0,6 VA
Impulse time min.
50 ms
Terminals for max.
2,5mm Ø
Cable length
max. 100 m
Mechanical data for CP 70A
Temperature range
-5º......+35ºC
Installation
for building-in
Isolation
4KV > 8 mm
Insulation
DIN 40050
DIN rail symmetric
DIN 46277
Dimensions (H x W x D)
85x70x72
Weight CP 70A
100 g
Connection diagram IR-Link type CP 70A
Product description
Remote control module IR-Link type CP 70A is
especially developed for remote control of
CONCEPT 2000 light control system with 38KHz
infrared remote controls type CP 76 (8 channels)
and type CP 79 (32 channels).
IR-link type CP 70 can transmit 8 channels on
the data bus and with possibilities of connection
of up to 8 IR-preamplifiers.
The module transmits at impact via infrared
preamplifier a command over the data bus.
Commands are received by the respective relay
and dimmer modules, which then react on the
command as required. The addressing and
programming are done by means of IR-remote
control and programming keys CONKEY type CP
79.
The channel range to be used (1-8, 9-16, 17-24
etc. see table of functions on the back) is
programmed into the module. Only one channel
range at a time can be active pr. module.
Up to 4 pcs. CP 70 can be connected on the bus
i.e. 32 channels can be established for IR remote
control. Power supply is via the 3-pin plug
provided, which is connected to the modules. Via
this plug plus (24 V DC), minus and data are
connected.
Installation guide.
Mount the module on the DIN rail and connect
the plug between the modules. Via this plug +/-
and "data cord" are connected.
Connect low current to the module, and check
connection before voltage is supplied for the
module. CP 70A must have external power
supply from type CP 11 (18-28 V DC).
Light scene 1
M
EAL
Light scene 2
GUESTS
Light scene 3
TELEVISION
Light scene 4
CLEANING
COFFEE
TABLE
WALL
CEI-
LING
Light requirements
Toggle switches
Help relays
(Curtain control)
Light dimmers
10.08.97
TRIAC-dimmer
Leading edge
Transistor dimmer
Trailing edge
0-10V
Ballast controller
Low current control
Relay module
type CP 24
Relay module
type CP 24
Dimmer module
type CP 31LR
Dimmer module
type CP 31CR
Dimmer module
type CP 31BC
+
F
Forforstærkerindgange
Moduleno.
+
_
D
+
_
D
+
_
CP 70A
B C D E F G H
I
K L
24V
1
2
3
4
5
6 7
8
Plus 24V
Minus (-)
Data
Plus 24V
Minus(-)
Data
1
2
3
4
5
+
-
F
LD
1
LD
2
LD
3
LD
4
LD
5
S1
S2
S3
S4
S5
IR-preamplifier
FUGA 50x77mm
type CP 72H
Touch button panel
with built-in
IR-preamplifier
- type CP 2502
- type CP 2507
ON/OFF
ON/OFF +
REGULATION
DATA
DATA
8 channels
CP 70A
3
Infrared-preamplifier
receives 38KHz signals
from remote controls and
transmits them on cord for
the decoder IR-Link type
CP 70A.
IR-Link CP 70A
receives signals
from IR-
preamplifier,
decodes them and
transmits them on
the data bus to
active modules type
Infrared remote control
transmits 38KHz signals
(8/32 channels) to
infrared preamplifier(s).
DINING
TABLE
