Conairphone SW234 Owner'S Manual Download Page 3

With a four prong style jack,
use a plug-in modular adapter
(see Figure 4).

For Wall Mounting

Your CONAIRPHONE

TM 

is

designed to mount over a
modular wall jack. Connect
the short telephone line cord
to the modular jack at the
bottom of the base and insert
the other end of the cord into
the modular wall jack. Position
the wall mount slots located
on the back of your telephone
over the two studs on wall
plate and pull down to lock in
place (see Figure 5).

OPERATION

Important Notice

Your CONAIRPHONE

TM

 will operate on all systems, true

tone or rotary.
1. If your home is wired for rotary service, move the

TONE/PULSE switch to PULSE position.

2. If your home is wired for Tone service, move the switch

to the TONE position.

3. If you are unsure of the type of service you have,

position TONE/PULSE switch to TONE. If dialing
cannot be done, set to PULSE.

Dialing a Call

Pick up phone, wait for a dial tone, then press the keys
for the number you want to dial. Your CONAIRPHONE

TM

will generate true tone sounds only on tone setting. On
pulse setting, electronic pulses are used to simulate
rotary dialing. Because of this, you may hear pulsing for
a second or two after the last key has been pressed.

Note: Your  CONAIRPHONE

TM

 features a lighted dial for

dialing in a darkened room.

Last Number Redial

Your CONAIRPHONE

TM

 remembers the last number

dialed. This is a convenient feature when trying to place
a call to a number that is not being answered or is
continuously busy. Press the hook switch to get a dial
tone followed by pressing the REDIAL. Your call will be
automatically dialed.

Ringer High/Low/Off

Your CONAIRPHONE

TM

 features a harmonic dual tone

ringer which can be adjusted to a loud (HI) or soft (LO)
sound level. When you don’t want to be disturbed, slide
switch to the “OFF” position. Now you can still make
outgoing calls without being disturbed by incoming calls.

Receiver Volume Control

The receiver volume control is located on the side of
your handset. This enables you to adjust the receiver
volume on your telephone handset from normal to high
for a more comfortable listening level.

Mute

Prevent sound from your room from being heard by
another party on the phone.
Press and hold the MUTE as long as you want this
feature activated.

Flash (Call Wait)

*

Allows you to access the Call Waiting service from your
local telephone company

*

 or access a new dial tone.

*

Requires special service from your local telephone
company.

Ending a Call

After you finish a conversation, just hang up the handset.
To make another call, depress the hook switch briefly,
release, and dial.

Hearing Aid Compatibility

Your CONAIRPHONE

TM

 is compatible with inductively

coupled hearing aids.

Figure 4

FCC and Telephone Company Requirements

Your telephone company is required by the Federal
Communications Commission to allow you to connect
FCC registered telephones to their lines. The FCC
requires you to provide information, if requested by the
local telephone company, about the connection of an
FCC registered telephone to their lines. They may ask
you for the FCC registration number and the ringer
equivalence number (REN); both are on the bottom of
the base. They may also ask for the Universal Service
Order Code (USOC), which is RJ-11C.

The REN is used to determine the quantity of devices
which may be connected to the telephone line. Excessive
REN’s on the telephone line may result in the devices
not ringing in response to an incoming call, in most, but
not all areas, the sum of the REN’s should not exceed
five (5.0). To be certain of the number of devices that
may be connected to the line, as determined by the total
REN’s, contact the telephone company to determine the
maximum REN for the calling area.

Should your equipment cause trouble on your line, which
may harm the telephone network, the telephone
company shall, where practicable, notify you that
temporary discontinuance of service may be required.

Where prior notice is not practicable and the
circumstances warrant such action, the telephone
company may temporarily discontinue ser vice
immediately. In case of such temporary discontinuance,
the telephone company must: (1) promptly notify you of
such temporary discontinuance; (2) afford you the
opportunity to correct the situation; (3) inform you of your
right to bring a complaint to the Commission pursuant to
procedures set forth in Subpart E of Part 68, FCC Rules
and Regulations.

The telephone company may make changes in its
communications facilities, equipment, operations or
procedures where such action is required in the operation
of its businesses and not in consistent with FCC Rules
and Regulations. If these changes are expected to affect
the use or performance of your telephone equipment,
the telephone company must give you adequate notice,
in writing, to allow you to maintain uninterrupted service.

If trouble is experienced with this equipment, please
contact CONAIRPHONE

TM

 Par ts and Ser vice

Department toll free at 1-800-366-0937 for repair and/or
warranty information. If the trouble is causing harm to
the telephone network, the telephone company may
request you remove the equipment from the network until
the problem is resolved.

This equipment cannot be used on telephone company-
provided coin service. Connection to Party Line Service
is subject to state tariffs.

Any changes or modifications not expressly approved
by Conair Corporation can void the user’s authority to
operate the equipment.

Additional Information

A. When your CONAIRPHONE

TM

 is not in use, make sure

the handset is engaged into the base unit.

B. Avoid rough handing, areas with excessive moisture, heavy

dust or extreme temperature.

C. To clean, use a mild detergent and slightly damp cloth.

Never use strong solvents or abrasives.

D. This equipment is not recommended for use on party lines.

CONAIRPHONE

TM

 CONSUMER

HOTLINE

For answers to all your questions regarding the operation
of your CONAIRPHONE

TM

, call the Consumer Hotline,

toll-free at 1-800-366-0937 between the hours of
8:30a.m. - 9:00p.m. (EST), Monday through Friday and
8:30a.m. - 12:30p.m. (EST), Saturday. To get up-to-date
product information, trouble shooting help and answers
to the most frequently asked questions, visit us on the
web at:

www.conairphone.com

Figure 5

5

6

7

8

Reviews: