Conairphone Metropolis SW2504, Owner'S Manual

Page: 3 / 9

OPERATION
Receiving a Phone Call
1. When your phone rings, pick up the handset and use like any basic telephone.
2. Hang up the handset to release the telephone line when conversation is completed.
Dialing A Call
NOTE :
Before dialing, make sure the Tone/Puse switch is correctly positioned for
your type of service.
Pick up the phone and wait for a dial tone, then press the keys for the number you
want. Your Metropolis
® telephone (Pulse setting) uses electronic pulses to
simulate dialing action. Because of this you may hear pulsing for a second for
two after the last button has been pressed.
Ringer On/Off
Be sure the ringer on/of switch is in the “ON” position. Your telephone uses a
mechanical bell ringer. When you don’t want to be disturbed, slide the ringer :
ON/OFF switch to the “OFF” position. Now you can still make outgoing calls,
without being disturbed by incoming calls.
Receiver Volume Control
The receiver volume control is located on the bottom of your base (see diagram A).
TROUBLE SHOOTING GUIDE
Problem :
No dial tone
• Check all modular plugs to be sure they have clicked into place.
• Try another phone jack. If your telephone works on another jack, there may be a
problem with your wiring.
Problem : The sound volume is too low.
• Is another extension off hook? If so, hang up extension.
Problem : Phone doesn’t ring.
• Is ringer switch set to the “OFF” position?
• How many extensions are connected to your line? If more than five
telephones are installed on the same line, you may need to contact your local
telephone company to determine the maximum number of extensions for your
calling area.
HEARING AID COMPATIBILITY
Your CONAIRPHONE TM telephone is compatible with inductively coupled hearing aids.
FCC WANTS YOU TO KNOW
This equipment complies with part 68 of the FCC rules and ACTA technical
requirements. On the bottom of the base of this equipment is a label that
contains, among other information, the Registration Number and Ringer
Equivalence Number (REN) for this equipment. You must, upon request, provide
this information to your telephone company.
The USOC number of the registration jack for the equipment is RJ11C.
The FCC compliant telephone cord and modular plug is provided with this
equipment. This equipment is designed to be connected to the telephone
network or premises wiring using a compatible modular jack which is
TIA/EIA-IS-968 compliant.
The REN is useful to determine the quantity of devices you may connect to your
telephone line and still have all of those devices ring when your telephone number is
called. In most, but not all areas, the sum of the RENs of all devices connected to
one line should not exceed five (5.0). To be certain of the number of devices you may
connect to your line, as determined by the REN, you should contact your local
telephone company to determine the maximum REN for your calling area.
If your telephone equipment causes harm to the telephone network, the telephone
company may discontinue your service temporarily. If possible, they will notify you in
advance. But if advance notice isn’t practical, you will be notified as soon as
possible. You will be informed of your right to file a complaint with the FCC.
Your telephone company may make changes in its facilities, equipment, operations,
or procedures that could affect the proper functioning of your equipment. If they do,
you will be notified in advance to give you an opportunity to maintain uninterrupted
telephone service. If you experience trouble with this telephone equipment the
telephone company may ask that you disconnect this equipment from the network
until the problem has been corrected or until you are sure that the equipment is not
malfunctioning.
This equipment may not be used on coin service provided by the telephone
company. Connection to party lines is subject to state tariffs.
This equipment is hearing aid compatible.
Warning : Changes or modifications to this unit not expressly approved by the
party responsible for compliance could void the user’s authority to operate the equipment.
ADDITIONAL INFORMATION
A. When your CONAIRPHONE TM telephone is not in use, make sure the handset
is engaged into the base unit.
B. Avoid rough handling, areas with excessive moisture, heavy dust or extreme
temperature.
C. To clean, use a mild detergent and slightly damp cloth, never use strong
solvents or abrasives.
D. Connecting this telephone to a coin operated telephone or a party line is
prohibited by law.
E. If it is determined that your telephone is malfunctioning, the FCC requires that
it be disconnected from the modular outlet until the problem has been corrected.
SERVICE
According to FCC regulations this equipment which has been certified and
registered by the FCC, may only be repaired by authorized person or the FCC
certification may be voided. Should you encounter any problems, please call the
Conairphone toll-free Customer Hotline for assistance:
1-800-366-0937,
Monday - Friday between the hours of 8:30 am - 9:00 pm (EST) and Saturday
8:30 am - 12:30 pm (EST).
You can also visit our website : www.conairphone.com
ONE YEAR LIMITED WARRANTY
This Conairphone TM telephone is warranted to the original purchaser to be free
from defects in materials and workmanship under normal installation, use, and
service for a period of one (1) year from the date of purchase as shown on the
purchaser’s receipt.
5 6