TELEPHONE OPERATION
NOTE:
Batteries must be installed, or Telephone operations will
not work properly (see Installation).
Receiving a Call
Handset
1. When your phone rings, pick up the handset and use it like
any basic telephone.
2. Hang up the handset to release the telephone line when your
conversation is completed.
Speakerphone
1. When your phone rings, press [SPEAKER] (the green LED
indicator light will come on).
2. Using the volume control, adjust the volume to the desired
sound level.
3. Press [SPEAKER] to end your conversation and release the
telephone line (indicator light will turn off).
Dialing a Call
Handset
1. Pick up the phone and wait for a dial tone.
2. Press the keypad for the telephone number you wish to dial.
Speakerphone
1. Press [SPEAKER] and wait for a dial tone.
2. Press the keypad for the telephone number your wish to dial.
3. When the party you are calling answers, you will hear them
through the speaker. Adjust the volume to the desired level.
4. When you have completed your call, press the [SPEAKER]
to release the telephone line.
Tone/Pulse Combination Dialing
Combination dialing is useful to subscribers of Pulse (rotary)
service who wish to gain access to various low-cost long-
distance or automated computer services otherwise not available
to them.
1. With the TONE/PULSE switch in the PULSE position, dial
the phone number.
2. Press [
*
], and your telephone will change to TONE dialing
mode.
10
3. Dial your code/authorization number. When your call is
completed, your telephone will automatically return to the
PULSE dialing mode.
NOTE:
Combination dialing can also be stored into the memory
for one-touch access to your long distance or automated
computer service.
BASIC MEMORY PROGRAMMING
The CID200 comes with 10-memory dialing.
NOTE:
Your local phone company restricts the time you can
have the handset off the base (off-hook).
YOU SHOULD PROGRAM THE CID200 MEMORY WITH THE
LINE CORD UNPLUGGED FROM THE WALL, IF YOU ARE
GOING TO PROGRAM MORE THAN ONE PHONE NUMBER.
Press [STORE] to enter memory store.
Press the keypad to enter the number that you want to program.
Press [STORE]. The ‘MEM’ will be displayed on the right corner
of LCD.
Press the memory location (0 to 9) on the keypad. The LCD will
then return to the ‘Answer-Ready’ mode, and display the total
call counter, new call counter, current time and date.
Copy from the Caller ID to Telephone Memory
Press [ ] or [ ] until the Caller ID memory location to be copied
appears on the LCD. Press [STORE] twice to enter memory
store. The ‘MEM’ will be displayed on the right corner.
Press the memory location (0 to 9) on the keypad. The LCD will
then return to the ‘Answer-Ready’ mode, and display the total
call counter, new call counter, current time and date.
If no key is pressed within 20 seconds, the LCD will return to
‘Answer-Ready’ mode.
Repeat the above steps to store a different number in the same
speed dial location, or to store a new number in a different speed
dial location.
NOTES:
• Pressing [PAUSE] will place a 4-second PAUSE into the
11
number. Which may be required for accessing special phone
services.
• You can store a number with up to 16 digits maximum. Only
the last 14 digits will be displayed.
MEMORY DIALING
1. Pick up the handset to make your call.
2. Press [MEMORY] [0] ... [MEMORY] [9] for one of the 10
memory locations to be dialed.
NOTE:
Remember to plug the telephone line cord back into the
wall.
CALLER ID OPERATION
NOTE:
Batteries are required for Caller ID operation.
Received Call
If only the caller’s phone number is
received, the LCD shows the caller’s
phone number with the time and date
it was received. The ‘NEW’ icon turns
on and New Call LED blinks.
Caller ID (Transmission) Error
If an incorrect, invalid or incomplete
Caller ID signal is received, the LCD
shows ‘-LINE ERROR-’.
Caller ID Private Call (Blocked)
If the name and number are not
available due to the caller’s restriction,
the LCD shows ‘-PRIVATE CALL-’
with the time and date received. The ‘NEW’ icon turns on and
New Call LED blinks.
Caller ID Out of Area (Data Not Available)
If the name and number are not
available, the LCD will show ‘-
UNAVAILABLE-’ with the call’s time
and date. The ‘NEW’ icon turns on
and New Call LED blinks.
12