Tone/Pulse Combination Dialing
Combination dialing is useful to subscribers of Pulse (rotary)
service who wish to gain access to various low-cost long-
distance or automated computer services otherwise not available
to them.
1. With the TONE/PULSE switch in the PULSE position, dial
the phone number.
2. Press [
*
], and your telephone will change to TONE dialing
mode.
3. Dial your code/authorization number. When your call is
completed, your telephone will automatically return to the
PULSE dialing mode.
NOTE:
Combination dialing can also be stored into the memory
for one-touch access to your long distance or automated
computer service.
BASIC MEMORY PROGRAMMING
The CID100 comes with 10-memory dialing.
NOTE:
Your local phone company restricts the time you can
have the handset off the base (off-hook).
YOU SHOULD PROGRAM THE CID100 MEMORY WITH THE
LINE CORD UNPLUGGED FROM THE WALL, IF YOU ARE
GOING TO PROGRAM MORE THAN ONE PHONE NUMBER.
Pick up the handset, and press
[STORE] to enter memory store.
Press the keypad to enter the number that you want to program.
The LCD on the back of the handset confirms the numbers you
entered.
Press [STORE]. The ‘MEM’ will be displayed on the right corner
of LCD.
Press the memory location (0 to 9) on the keypad. The LCD will
then return to the ‘Answer-Ready’ mode, and display the total
call counter, new call counter, current time and date.
Copy from the Caller ID to Telephone Memory
Press [ ] or [ ] until the Caller ID memory location to be copied
appears on the LCD. Press [STORE] twice to enter memory
store. The ‘MEM’ will be displayed on the right corner.
Press the memory location (0 to 9) on the keypad. The LCD will
then return to the ‘Answer-Ready’ mode, and display the total
call counter, new call counter, current time and date.
If no key is pressed within 20 seconds, the LCD will return to
‘Answer-Ready’ mode.
Repeat the above steps to store a different number in the same
speed dial location, or to store a new number in a different speed
dial location.
NOTES:
• Pressing [REDIAL] will place a 4-second PAUSE into the
number. Which may be required for accessing special phone
services.
• You can store a number with up to 16 digits maximum. Only
the last 14 digits will be displayed.
MEMORY DIALING
Pick up the handset to make your call.
Press [MEM] [0] ... [MEM] [9] for one of the 10 memory locations
to be dialed.
NOTE:
Remember to plug the telephone line cord back into the
wall.
CALLER ID OPERATION
NOTE:
Batteries are required for Caller ID operation.
If an incorrect, invalid or incomplete
Caller ID signal is received, the LCD
shows ‘-LINE ERROR-’.
If only the caller’s phone number is received, the LCD shows
the caller’s phone number with the time
and date it was received. The ‘NEW’
icon turns on and New Call LED blinks.
If the name and number are not available
due to the caller’s restriction, the LCD
shows ‘-PRIVATE CALL-’ with the time
and date received. The ‘NEW’ icon turns on and New Call LED
blinks.
If the name and number are not
available, the LCD will show ‘-
UNAVAILABLE-’ with the call’s time and
date. The ‘NEW’ icon turns on and New Call LED blinks.
If no key is pressed within 20 seconds,
the LCD will show the ‘Answer-Ready’
mode, and display the total call counter,
new call counter, current time and date.
VIEW THE CALLER ID MEMORY
If you have new calls (‘NEW’ icon and New Call LED is lit). Press
[ ] or [ ] to read all of the most recent calls. The CALL# will
decrease.
Once all the new calls have been read, ‘END OF NEW CALL’
will be displayed.
Press [ ] to view the oldest calls, or press [ ] to view the most
recent calls.
NOTE:
After you view all the call in memory, the LCD will show
‘END OF LIST’.
NOTES:
1. The New Call LED will blink until all the new Caller ID data
has been reviewed.
2. If the ‘RPT’ icon is turned on, you have received multiple NEW
calls from the same number.
3. If you receive a call from a number stored in (previously
reviewed) memory, the data in memory will be replaced with
the new call’s time and date and the ‘NEW’ icon will be turned
on.
If no key is pressed within 20 seconds, the LCD will show the
‘Answer-Ready’ mode, and display the total call counter, new
call counter, current time and date.
10
11
12