Body Analysis:
1.
Operate the scale on a secure flat floor. Tap the scale to turn it on, and wait till
“0.0” appears. Press the “User” button repeatedly until your user number shows on
the display.
2.
Stored data for your user number appears (User number, Height, and Age) then
the scale displays “0.0”.
3.
Step on the scale barefoot with your feet aligned on the electrodes (metal strips)
on both the sides of platform. Note: you must be barefoot in order for the scale to
read your body analysis measurements.
4.
Your current weight will be displayed for a few seconds.
5.
Then the display will show “bF %” followed by your body fat percentage.
6.
Next, “H2O” shows on the display, followed by your body water percentage.
7.
Then, “bone” shows on the display, followed by your bone mass value.
Instructions
for use of
Weight Watchers
bathroom scale
Congratulations! By purchasing this Weight Watchers Scale, you’ve made
the first step toward taking control of your weight. To get the greatest benefit
from your purchase, please read this entire brochure before using your scale.
©2010 Conair Corporation. East Windsor, NJ 08520, Glendale, AZ 85307. Made in China.
©2010 Weight Watchers International Inc. All rights reserved. Weight Watchers is the
registered trademark of Weight Watchers International Inc. and used under license.
Service Centers
Conair Corporation
Service Department
150 Milford Road
East Windsor, NJ 08520
Conair Corporation
Service Department
7475 N. Glen Harbor Blvd.
Glendale, AZ 85307
1-800-326-6247
www.conair.com
10AD115510
IB-10186
LIMITED TEN YEAR WARRANTY
Conair will repair or replace, at our option, your appliance free of charge for 120
months from the date of purchase if the appliance is defective in workmanship
or materials.
To obtain service under this warranty, return the defective product to the service
center listed below that is nearest you, together with your sales slip and $5.00 for
postage and handling. California residents need only provide proof of purchase
and should call 1-800-3-CONAIR for shipping instructions. In the absence of a
receipt, the warranty period shall be 120 months from the date of manufacture.
ANY IMPLIED WARRANTIES, OBLIGATIONS, OR LIABILITIES, INCLUDING BUT NOT
LIMITED TO THE IMPLIED WARRANTY OF MERCHANT ABILI TY AND FITNESS FOR
A PARTICULAR PURPOSE, SHALL BE LIMITED IN DURATION TO THE 120-MONTH
DURATION OF THIS WARRANTY.
Some states do not allow limitations on how
long an implied warranty lasts, so the above limitations may not apply to you.
IN NO EVENT SHALL CONAIR BE LIABLE FOR ANY SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY,
EXPRESS OR IMPLIED, WHATSOEVER.
Some states do not allow the exclusion
or limitation of special, incidental, or consequential damages, so the above
limitation may not apply to you. This warranty gives you specific legal rights,
and you may also have other rights which vary from state to state.
Scales by
™
Models #WW28
2. Setting the user number
Press the “Set “button. The number “P-01” will appear and blink. Use the Up/Down
button to select a user number (P-01 to P-4). Press SET to confirm.
3. Setting the height
Next, the height indicator “HT” and inch or cm symbol light up (if switch is set to lb,
default is height in inches; if switch is set to KG, default is height in cm). Press the
up or down arrows to adjust the height. Pressing and holding either the up or the
down arrow will advance numbers quickly. Press SET to accept the height. Scale
enters the age setting mode.
4. Setting the age
“AGE” appears and the default age 25 flashes. Press the up or down arrows to ad-
just the age and press SET to confirm. The scale enters the gender setting mode.
5. Setting the gender
A gender icon flashes. Press the up or down arrows to choose between male and
female gender. Press the set key to confirm.
6. Display and store data
• Once the gender is set, data storage is complete.
• User number, height and age each display for a few seconds.
7.
The scale will turn off automatically.
8.
Finally, "b" shows on the display, followed by your BMI (Body Mass Index)
9.
Display scrolls through your body fat, body wate, bone mass and BMI values
again and then scale turns off.
NOTES
If you step on the scale before “0.0” appears, the scale will not function
properly.
Scale will show “Err” if there is improper foot contact in the body analysis
mode, for instance, when you stand on the scale with socks or shoes on.
Hard or dry skin can prevent you making proper contact with electrodes on
the surface of the scale. Try applying a small amount of moisturizer to your
feet before using the scale.
10ad115510_ww28_ib_comp.indd 1-6
6/28/10 2:41:48 PM
