background image

  5.  Do not apply stimulation while bathing or in a shower. Use only on clean, dry skin and in a dry area.

  6.  If you have one of the following conditions, please consult with your physician before purchasing 

       or using this device:

          Acute disease, malignant tumor, infectious disease, pregnant, heart disease, high fever, abnormal 

          blood pressure, lack of skin sensation or an abnormal skin condition, any condition requiring the

          active supervision of a physician.

PRECAUTIONS

1.  Do not use this device while driving.

2.  Do not use this device while sleeping.

3.  Do not use this device in high humidity areas such as a bathroom.

4.  Keep the device away from wet areas, high temperature, and direct sunlight. 

5.  Keep this device out of reach of children.

6.  Stop using this device at once if you feel pain, discomfort, dizziness, or nausea, and consult 

your physician.

7.  Do not attempt to move the electrode pads while the device is operating.

8.  Do not use the device around the heart, on the head, mouth, pudendum or blemished skin areas. 

9.  Do not apply stimulation of this device in the following conditions:

•  Across the chest because the introduction of electrical current into the chest may cause 

rhythm disturbances to the heart, which could be lethal;

•  Over painful areas. Please consult with your physician before using this device if you have  

painful areas;

•  Over open wounds or rashes, or over swollen, red, infected, or inflamed areas or skin eruptions 

(e.g., phlebitis, thrombophlebitis, varicose veins). Apply stimulation only to normal, intact, clean, 

healthy skin;

•  In the presence of electronic monitoring equipment (e.g., cardiac monitors, ECG alarms). The 

electronic stimulator may not operate properly when the electrical stimulation device is in use;

•  While operating machinery, or during any activity in which electrical stimulation can put you at 

risk of injury; 

•  On children, or individuals with certain disabilities.

10.  Be aware of the following:

•  Consult with your physician before using this device. The stimulation with the device may:

     -   cause lethal rhythm disturbances to the heart in susceptible individuals, and,

     -   disrupt the healing process after a recent surgical procedure;

•  That the device is not effective for pain of central origin, including headache;

•  That the device is not a substitute for pain medications and other pain management therapies;

Summary of Contents for Theralief TN100





















Reviews: