USER MAINTENANCE
Your dryer is virtually maintenance free. No
lubrication is needed. For proper operating
performance, the dryer must be kept clean.
Blocked or clogged air intake vents will
cause the dryer to overheat.
When clean-
ing is needed, unplug the cord, and clean
dust and lint from air intake openings with
a small brush or the brush attachment of
a vacuum cleaner. The outer surface of the
dryer should be wiped clean with a damp
cloth only.
Blocked or clogged air intake will cause
the dryer to overheat.
If overheating occurs,
an automatic safety device will shut the
dryer or the heat off to prevent damage or
personal injury. If the unit or the heat cycles
off, unplug the cord and allow the dryer to
cool for 10 to 15 minutes before restarting.
Make sure the air vents are clean.
CAUTION
NEVER allow the power supply cord to be
pulled, twisted, or severely bent. Never wrap
the cord tightly around the dryer. Damage
will occur at the high flex point of entry into
the dryer, causing it to rupture and short.
Inspect the cord frequently for damage. Stop
use
immediately if damage is visible or
unit stops or operates intermittently.
If the cord or dryer is damaged or does not
operate properly, return it for repair to the
nearest service centre. No repairs should be
attempted by the consumer.
