Conair Infiniti Nanosilver 230, Instruction & Styling Manual

Page: 1 / 2

Dis co de
cer ám ica
Tec nol ogí a
ión ica
Mot or d e
rot aci ón ráp ida
Filt ro
art icu lad o
Tec nol ogí a
Nan o S ilv er
Tou rm alin e
Cer am ic™
Dis par o d e
aire fr ío
2 a jus tes de
cal or/ vel oci dad
Man go
ple gab le
187 5
Vat ios
Ind ica dor
lum ino so de la
fun ció n ió nic a
Dob le vol taj e
sim ultá nea men te el s eca dor y un cep illo. Col oqu e
el c epil lo deb ajo de cad a se cci ón de cab ello y
diri ja el f luj o de aire cali ent e ha cia la par te sup erio r
del cab ello. Mue va el c epil lo y el sec ado r le nta y
sim ultá nea men te has ta las pun tas , di rig ien do el
flu jo de aire hac ia el c abe llo , no hac ia el c uer o
cab ellu do. Su sec ado r ge ner a un a nu be de ion es
neg ativ os que ayu dan a re duc ir la ele ctr ici dad
est átic a, el f riz z y los pel os sue lto s, al m ism o
tie mpo q ue a gre gan b rill o.
2. M ant eng a la s e ntra das de ai re del ap ara to sin
obst ruc cion es y lib res de pe lo.
3. P ara no la stim ar e l c abe llo , n o c once ntre el flu jo
de aire en un a se cci ón s ola men te.
4. P ara re aliz ar ret oqu es r ápi dos en tre la vad os,
roc íe un poc o d e a gua sob re el c abe llo an tes de
seca rlo .
5. C uan do use el seca dor pa ra cre ar b ucl es y onda s,
sequ e e l c abe llo ca si p or c om ple to usa ndo un aj ust e
de tem per atu ra baj o, l ueg o fi je el p ein ado us and o
el d isp aro de ai re frío .
FAM ILI ARÍ CES E CON S U SEC AD OR
El sec ado r p rof esi ona l N ano Silv er Tou rm alin e
Cer am ic™ de Inf ini ti b y Co nai r™ sec a el cab ello
de man era muy efic az, inc lus o cu and o se usa
cal or baj o, y a yud ará a m ant ene r s u c abe llo
sal uda ble , bril lan te y d ócil .
CUE RPO Y V OLU MEN
Par a cr ear may or v olu men , ba je la
cab eza mie ntr as sec a el cab ello.
Diri ja el f luj o de aire hac ia las raí ces
par a ob ten er m ás vol um en. Cua ndo
el c abe llo est é se co, peí nes e en la
for ma d ese ada .
ALI SA DO
Aho ra, pu ede ali sar su ca bell o fá cilm ent e
sin te ner qu e u tiliz ar u n ce pillo , g rac ias
al p eine ali sad or N ano Si lve r To urm alin e
Cer am ic™ . E l p ein e d ese nre da y e stir a e l c abe llo
mien tra s su nú cleo cu bier to de nan o p lat a y tur mali na
de cer ám ica de ja el c abe llo su ave y sed oso .
ON DUL AD O
Par a c rea r o nda s y bu cle s, u tilic e e l
exc lus ivo di fus or d e a ire co n d ébi to
var iab le. Pa ra rec ibi r m ás aire , a bra
el d ifu sor m ás, gi ran do el d isc o h acia
la der ech a ( sig uie ndo la s f lec has ).
Par a c rea r m ás vol um en, ci erra el
difu sor , g ira ndo el di sco ha cia la izq uie rda .
LA TEC NOL OGÍA D E L A N ANO P LAT A co mbi na
mic ro- par tíc ula s d e c erá mic a c on pla ta par a u n
cab ello he rm oso y s alud able . L a te cno log ía T our mali ne
Cer am ic™ ut iliz a tu rm alin a d e c erá mic a, l a c ual
em ite ca lor in fra rro jo lej ano pa ra sec ar e l c abe llo
deli cad am ent e, s in las tim arlo . Ta mbi én ge ner a io nes
neg ativ os que re alza n y re nue van la vi tal ida d d el
cab ello . L a n ano pl ata tie ne pro pie dad es ú nica s q ue
dej an el c abe llo lim pio , b rilla nte y con ap arie nci a
sal uda ble .
EL MOT OR DE ROT ACI ÓN RÁ PID A in cre men ta
la vel oci dad del fluj o de aire ade ntr o de l se cad or
y en el c abe llo par a lo gra r un sec ado y un pei nad o
más ráp ido. Est o ta mbié n m ini miz a lo s d año s
cau sad os por el c alo r, r edu ce el f riz z y vue lve el
cab ello m ás d ócil .
LA TEC NOL OGÍ A T OUR MAL INE CE RAM IC ™ u tiliz a
el p ode r de la cer ám ica y d e la tu rm alin a pa ra m ant ene r
su cab ello br illa nte y s alud able . G ene ra calo r in fra rro jo
leja no y io nes ne gat ivo s q ue a ctú an al n ive l m olec ular
par a se car el cab ello de sde ad ent ro, lo cua l lo gra un
sec ado m ás r ápi do y m ás s uav e p ara el cab ello . E sta
tec nolo gía mini miza los da ños no rm alm ent e ca usa dos
por el ca lor , re duc e e l fr izz y vue lve el ca bel lo más
dóc il. Los c ris tal es de tur mal ina g ene ran io nes
neg ativ os q ue sua viza n la cu tícu la y d eja n e l c abe llo
bril lan te y s edo so.
1. E nch ufe el a par ato y ap rie te el b otó n de pru eba
(vé ase e l grá fic o más a baj o).
2. E l ap ara to dej ará de fun cio nar , se oirá un clic
y el b otó n de r eaj ust e sal tar á.
3. P ara rea jus tar lo, des con ect e el apa rat o, a prie te
el b otó n de rea jus te lue go vue lva a co nec tar el
apa rat o.
4. S i el cor tac irc uito de seg urid ad no fun cio nar a
cor rec tam ent e, r egr ese el a par ato a un cen tro
de s erv ici o aut ori zad o.
5. S i el apa rat o ca yer a al agu a, e s m uy imp ort ant e
que lo man de a un cen tro de ser vic io aut oriz ado.
No i nte nte r eaj ust arlo.
6. P rue be el c ort aci rcu ito de seg urid ad ant es de
cad a uso p ara a seg ura rse q ue e sté o per ativ o.
Si e l se cad or se apa gar a y el b otó n de rea jus te
sal tar a du ran te el u so, est o po dría ind ica r un mal
fun cio nam ien to. Si e sto ocu rrie ra, des con ect e el
apa rat o, p erm ita que enf ríe y co néc tel o ot ra vez .
El a par ato deb ería fun cio nar nor mal men te. Si n o
fue ra el c aso , re gré sel o a un cen tro de ser vic io
aut oriz ado p ara q ue l o rev ise n y lo r epa ren .
GUÍ A P AR A U N S ÚPE R P EIN AD O
La mejo r ap arie ncia em piez a p or u n re cor te d e ca bell o
bie n m ant eni do. S iem pre c uid e s u c abe llo c on
cha mpú es, aco ndic ion ado res y p rod uct os d e ac aba do
de cal ida d s upe rio r.
FUN DAM EN TOS D EL S ECA DO
1. L ave y ac ond ici one su cab ello con los pro duc tos
des ead os. Enj uág uel o b ien y sé que lo con una
toa lla par a eli min ar e l ex ces o de agu a. D ivi da el
cab ello en sec cio nes . S equ e el cab ello usa ndo
INF ORM ACI ÓN ADI CION AL
PAR A L OS APA RAT OS DE DO BLE VO LTA JE
Pon ga el s ele cto r de vol taj e en la pos ici ón “12 5”
par a us o en los Est ado s Un ido s y en la pos ici ón
“25 0” par a us o en paí ses con sum ini stro elé ctri co
de 220 a 25 0 vo ltio s. A ver igü e el vol taj e an tes
de enc huf ar el a par ato. En cie rto s pa íse s, s erá
nec esa rio u tiliz ar u n ada pta dor d e enc huf e.
Ope rac ión 1 10- 125 v olti os
Pon ga el s ele cto r de vol taj e en la pos ici ón “12 5”.
El a par ato fun cio nar á co n to dos los aju ste s de
cal or y de vel oci dad : ca lor y ve loc ida d ba jos (LO )
y cal or y v elo cid ad a lto s (H I).
Ope rac ión 2 20- 250 v olti os
Pon ga el in ter rupt or e n la po sic ión “L O” y el sele ctor
de vol taj e e n la po sici ón “2 50” . E l a par ato fu ncion ará
con ca lor y v elo cid ad alto s ú nic am ent e. No cam bie
la vel oci dad o la se lec ció n d e v olta je dur ant e
el u so. De je el c alo r y la ve loc ida d e n “ LO” y
el s ele cto r d e v olta je en “25 0” . E n c ier tos pa íses ,
será ne ces ario ut iliz ar u n a dapt ador de en chu fe.
IM POR TAN TE
GUÍ A DE OP ERA CIÓN PA RA EL SEC ADO R DE 18 75
VAT IOS
El u sar est e ap ara to en el m ism o ci rcu ito o co n
el m ism o fu sib le que otro s ap ara tos pod ría act iva r
el i nte rru pto r de circ uito de 15 amp erio s o que mar
un fus ibl e de 15 amp erio s. N UN CA ree mpla ce el
fus ibl e po r un o de may or cap aci dad que la del
circ uito. Est o p odr ía pro voc ar un inc end io
elé ctr ico.
PRU EBE EL CO RTA CIRC UIT O DE SE GURI DAD AN TES
DE C ADA US O
Est e ap ara to est á do tad o de un cor tac irc uito de
seg urid ad lla mad o AL CI ( App lian ce Lea kag e Ci rcu it
Int err upt er), que apa ga el a par ato inm edi ata men te
si é ste cay era al a gua . Ha ga la pru eba sig uie nte
par a as egu rar se que el s ist em a de det ecc ión de
agu a fun cio ne c orr ect am ent e:
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially when
children are present, basic safety precautions should
always be followed, including the following:
READ ALL INSTRUCTIONS
BEFORE USING
KEEP AWAY FROM WATER
DANGER
–
Any hair dryer is electrically
live even when the switch is off. To reduce the risk
of death or injury by electric shock:
1. Always unplug appliance immediately after
using.
2. Do not use while bathing or in a shower.
3. Do not place or store appliance where it can
fall or be pulled into a tub or sink.
4. Do not place in, or drop into, water or other
liquid.
5. If an appliance falls into water, unplug it
immediately. Do not reach into the water.
WARNING
–
To reduce the risk of
burns, electrocution, fire, or injury to persons:
1. This appliance should never be left
unattended when plugged in.
2. This appliance should not be used by, on, or
near children or by individuals with certain
disabilities.
3. Use this appliance only for its intended use as
described in this manual. Do not
use attachments not recommended by the
manufacturer.
4. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly, if it has been dropped, damaged,
or dropped into water. Return the
appliance to a Conair service center for
examination and repair.
5. Keep the cord away from heated surfaces.
Do not pull, twist, or wrap line cord
around dryer, even during storage.
6. Never block the air openings of the appliance
or place it on a soft surface, such as a bed or
couch, where the air openings may be
blocked. Keep the air openings free of lint,
hair, and the like.
7. Never use while sleeping.
8. Never drop or insert any object into any
opening or hose.
9. Do not use outdoors or operate where aerosol
(spray) products are being used or where
oxygen is being administered.
10. Do not use an extension cord to operate dryer.
11. Do not direct hot air toward eyes or other
heat-sensitive areas.
12. Attachments may be hot during use. Allow
them to cool before handling.
13. Do not place appliance on any surface while it
is operating.
14. While using the appliance, keep your hair out
of it. Keep your hair away from the air inlets.
15. Do not use with voltage converter.
16. CAUTION: when adjusting airflow setting to
diffuser, surface area may be hot. Allow to
cool in between settings.
17. Be sure dual-voltage selector is in correct
voltage position before operating. Before
plugging in, read the information about dual
voltage contained in the instruction section of
this manual.
18. This appliance was set at the factory to
operate at 125 volts. Refer to Operating
Instructions section of this manual for conver-
sion to 250 volts operation.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This appliance is intended for household use only.
Use on Alternating Current (60 hertz) only. Standard
Dryers are designed to operate at 110 to 125 volts
A.C.
This appliance has a polarized plug (one blade is
wider than the other). As a safety feature, this plug
will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If
it still does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.
FOR DUAL VOLTAGE DRYERS
For use in the U.S.A., the voltage selector switch
should be placed in the 125 position. For use in several
countries overseas, the voltage selector may need
to be placed in the 250 position. Confirm the voltage
available at each overseas location before using the
appliance. For connection to a 250 volt supply, use
an attachment plug adapter of the proper configuration
for the power supply receptacle.
For 110-125 Volt Operation
Flick the dual voltage switch to the 125 position.
In this position, the dryer operates on all available
heat and speed settings.
For 220-250 Volt Operation
First put the HI-LO switch into LO. Flick the dual
voltage switch to the 250 position. At 220-250V
while set at LO, the dryer operates only at high
speed with high heat. Do not attempt to operate
the HI-LO switch or change to 125 position when
operating on 220-250V. The switches must be set
and remain in the LO and 250 positions. A plug
adapter may be necessary in certain countries.
IMPORTANT
1875 WATT OPERATING GUIDE
Use of this dryer on the same circuit or fuse with
other electrical products or appliances may trip a
15 amp circuit breaker or blow a 15 amp fuse.
NEVER replace the fuse with one rated higher than
the capacity of the circuit. Doing so could result in
an electrical fire.
CHECK ALCI SAFETY FEATURE EVERY
TIME YOU USE APPLIANCE.
This appliance is equipped with an Appliance
Leakage Circuit Interrupter (ALCI), a safety feature
that renders it inoperable under some abnormal
conditions, such as immersion in water. To make
sure the ALCI is functioning properly, perform the
following test. The purpose of this test is to allow
you to make sure the water sensing system (ALCI)
is working.
1. Plug in the appliance and press test button on
plug (See appropriate diagram below).
2. The appliance will stop working. There will be an
audible click and reset button will pop out.
3. To reset ALCI with a reset button, unit should
be unplugged. Then push reset button in, and
reinsert plug into outlet.
4. If ALCI is not functioning properly, return
appliance to nearest service center.
5. It is important that if immersion occurs, this
unit be brought to a service center. Do not try to
reset.
6. Be sure to repeat test every time you use the
unit to confirm ALCI is operational.
Should the appliance go off and the reset button
pop up during use, this could indicate a malfunction
in the unit. Remove plug from outlet and allow the
appliance to cool. Reinsert plug into outlet.
The appliance should then function normally. If
not, return to an authorized Conair Service Center
for evaluation and repair.
SUPER STYLING GUIDE
Your best looks begin with a good haircut that’s
well maintained. Always treat hair right with su-
perior quality shampoos, conditioners, and finish-
ing products.
DRYING BASICS
1. Shampoo and condition hair with products of
your choice. Rinse thoroughly. Towel dry hair to remove
excess moisture. Using the dryer along with your
styling brush, start at a lower setting and direct hot
air through a section of hair at a time. Move dryer
steadily across each section so that the hot air passes
through hair. Direct air flow at hair not scalp. Clouds
of negatively charged ions will help to reduce static
electricity, control frizzy flyaways and contribute to
your hair’s shine.
2. Keep dryer’s air intake vents unobstructed and
free from hair while drying.
3. To avoid over drying, do not concentrate heat on
any one section for any length of time. Keep dryer
moving as you style.
4. For quick touch ups, between shampoos, dampen
hair with a mist of water before styling with the
dryer.
5. When using your dryer to create curls and waves,
dry hair almost completely on a warmer temperature
setting, then finish styling with Cool Shot feature to
close hair shaft and lock in style.
GETTING TO KNOW YOUR DRYER
The Infiniti by Conair
™
Nano Silver Tourmaline
Ceramic
™
Styler is very effective, even at
lower temperatures, and helps to give healthier-
looking, shiny, more manageable hair with
maximum styling control.
BODY & VOLUME
To create extra volume, turn
head upside down while
drying. Position the air flow
toward the roots for max-
imum lift. When hair is dry,
toss head back and brush
hair into place.
STRAIGHTENING
Now you can straighten hair
without a brush. With the
straightening attachment,
it’s easy. Combs detangle
and keep hair taut while a
heated center Nano Silver
Tourmaline Ceramic™-
coated metal plate glides through hair, leaving
it looking silky, smooth.
MAKING WAVES
For curlier, wavier hair use the unique adjustable
diffuser attachment. Choose
from two variable airflow
settings for gentle drying or
direct airflow for more
volume. To open, turn dial
to the right for greater airflow
(follow arrows on diffuser).
For a gentler drying setting,
turn dial to the left to close.
The Infiniti by Conair
™
Nano Silver Tourmaline
Ceramic
™
Folding Styler is very effective, even
Reset
Test
Reset
Test
GETTING TO KNOW YOUR DRYER
Bot ón de
rea jus te
Bot ón de
pru eba
Bot ón de
rea jus te
Bot ón de
pru eba
FAMI LIA RÍCE SE C ON S U SECA DOR
at lower temperatures, and helps to give
healthier-looking, shiny, more manageable hair
with maximum styling control.
NANO SILVER TECHNOLOGY combines the
technology of micro particles of ceramic and
silver for clean, beautiful, healthy looking results.
Tourmaline Ceramic
™
emits infrared heat for
gentle styling and is known to emit ion reflectives,
which enhance and renew the vitality of your
hair. Nano Silver has unique properties for clean,
shiny, healthy-looking hair.
HIGH TORQUE MOTOR increases the velocity
at which air moves through the dryer and into
your hair, helping you dry and style your hair
faster.
TOURMALINE CERAMIC™ HEAT TECHNOLOGY
will keep your hair healthy and shiny. It generates
full spectrum, infrared heat and ions which work
on hair molecules to dry them inside and out. This
drying process is gentle and quick; it minimizes
heat damage and makes hair less frizzy and more
manageable. Tourmaline crystals generate natural
ions that smooth the cuticle for silky, shiny hair.
THE IONIZING FUNCTION generates a cloud of
negative ions that can:
• neutralize the generally positive charge on
flyaway, frizzy hair
• eliminate static electricity
• contribute to shine
• make hair less frizzy and more
manageable.
DUAL VOLTAGE FOR WORLDWIDE TRAVEL
Ceramic
Disk
Technology
Ionic
Technology
High Torque
Motor
Hinged
Filter
Nano Silver
Tourmaline
Ceramic™
Technology
Cool Shot
Button
2 Heat/Speed
Settings
Twist Folding
Handle
1875
Watts
Nano Silver Tourmaline
Ceramic™ Coated
Straightening Pic
Adjustable Diffuser
with 2 settings
provides variable
airflow
Open = diffused
airflow
Closed = more volume
through fingers
Ionic
Indicator Light
Concentrator
Dual Voltage
MED IDA S D E
SEG URI DAD
IM POR TAN TES Sie mpr e q ue use ap ara tos el éct ric os,
esp ecia lm ent e e n la pr ese ncia de ni ños , d ebe
tom ar p rec auc ion es bás ica s d e s egu rid ad, en tre
las cu ale s la s s igu ien tes :
LEA TO DAS LA S
INS TRU CCI ONE S A NTE S
DE USA RLO
MAN TEN GA EL APA RAT O
ALE JAD O D EL AGU A
PEL IGR O
–
Cu alq uie r el ect rod om ést ico
per man ece baj o te nsi ón, aun que el i nte rru pto r
est é ap aga do. Par a re duc ir e l rie sgo de mue rte
o her ida p or d esc arg a:
1. S iemp re des con ect e el apa rat o inm edi ata men te
des pué s de u sar lo.
2. N o lo u se e n el b año o l a duc ha.
3. N o co loq ue ni g uar de el a par ato don de pue da
cae r o ser e mpuj ado a u na b añe ra o u n lav abo.
4. N o co loq ue el a par ato ni l o de je cae r al agu a
u otr o líqu ido.
5. Si el apa rat o c aye ra al agu a, des con éct elo
inm edi ata men te. No t oqu e el a gua .
ADV ERTE NCI A
–
Par a re duc ir
el r ies go de que mad ura s, e lec tro cuc ión , in cen dio
o her ida s:
1. Nun ca d eje e l apa rat o des ate ndi do
mie ntr as e sté c one cta do
2. E ste a par ato n o deb ería s er u sad o por ,
sob re o c erc a de n iño s o per son as c on
alg una d isc apa cid ad.
3. U tili ce e ste a par ato ú nic am ent e con e l
pro pós ito p ara e l cua l fue d ise ñad o y
sol am ent e seg ún l as i nst ruc cio nes . Sól o
use a cce sor ios r eco men dad os p or e l
fab ric ant e.
4. N o ope re e ste a par ato s i el c ord ón o l a
cla vija e stu vie sen d aña dos , des pué s de
que h ubi ese f unc ion ado m al o q ue s e
hub ies e caí do o s i est uvi ese d aña do.
Reg res e el a par ato a u n cen tro d e
ser vic io a uto riz ado p ara s u rev isi ón,
rep ara ció n o aju ste .
5. M ant eng a e l c abl e a lej ado de su per fic ies
cal ien tes . N o ja le, re tue rza ni en rol le el
cab le alre ded or d el a par ato .
6. N unc a blo que e las a ber tur as d e aire n i
col oqu e el a par ato e n una s upe rfic ie
bla nda , com o una c am a o un s ofá , don de
se p ued an o bst rui r. M ant eng a las
abe rtu ras li bre s de p elu sas , cab ello s y
ele men tos s im ilar es.
7. N unc a use e ste a par ato m ien tra s est é
dor mid a o ado rm ilad a.
8. N unc a dej e cae r ni i nse rte u n obj eto e n
nin gun a de l as a ber tur as o e n el t ubo d e
aire.
9. N o lo u tili ce e n ext erio res , ni l o hag a
fun cio nar d ond e se e sté n usa ndo
pro duc tos e n aer oso l (sp ray ) o don de s e
est é adm ini str and o oxí gen o.
10. No ut ilic e u na ext ens ión con es te apa rat o.
11. N o diri ja e l aire c alie nte h aci a los o jos u
otr as á rea s sen sib les a l cal or.
12. L as r ejil las y l os a cce sor ios p ued en
vol ver se m uy c alie nte s dur ant e el u so.
Per mita q ue e nfr íen a nte s de
man ipu lar los .
13. N o col oqu e el a par ato e n nin gun a
sup erf ici e mie ntr as e sté f unc ion and o.
14. M ant eng a su c abe llo a lej ado d el a par ato y
de l as a ber tur as d e aire m ien tra s est é
fun cio nan do.
15. N o utili ce e ste a par ato c on u n conv ert ido r
de v olta je.
16. PRE CAU CIÓ N: El d ifu sor d e aire s e vue lve
muy c alie nte. P erm ita q ue e nfr íe a nte s de
camb iar e l déb ito d e aire.
Sec ado r de d obl e vol taj e:
17. A seg úre se q ue e l sel ect or d e vol taj e est é
en l a pos ici ón c orr ect a ant es d e enc end er
el a par ato. L ea l as i nst ruc cio nes d e uso
par a los a par ato s de d obl e vol taj e
con ten ida s en e ste m anu al a nte s de
con ect ar e l apa rat o al t om aco rrie nte.
18. E l sel ect or d e vol taj e del a par ato f ue
pue sto e n la p osi ció n “12 5” p or e l
fab ric ant e, p ara u so e n paí ses c on
sum ini str o elé ctr ico d e 110 /12 5 vol tio s. L a
sec ció n “In for mac ión A dic ion al” d e est e
man ual l e exp lica rá c om o utiliz ar e l
sec ado r en p aís es c on s um ini str o elé ctr ico
de 2 20/ 250 v olti os.
INS TRU CCI ONE S
DE U SO
Est e ap ara to fue dis eña do par a us o pr ofe sio nal .
Úse lo sol am ent e co n Co rrie nte Alte rna de 110 a
125 V (60 h ert zios ).
El c abl e de est e ap ara to est á do tad o de una cla vija
pol ariz ada (un pol o es más anc ho que otro ). C om o
med ida de seg urid ad, se pod rá enc huf ar d e un a
sol a m ane ra en el t om aco rrie nte pol ariz ado. Si
no ent ra por comp let o, i nvié rte la. Si a ún no ent ra
comp let am ent e, c om uní que se con un ele ctr ici sta .
No i nte nte v enc er e sta f unc ión d e seg urid ad.
Pei ne alis ado r c ubi ert o
de Nan o S ilv er
Tou rm alin e C era mic ™
Difu sor de ai re con
déb ito de
air e v aria ble co n
2 p osi cio nes
Abi ert o = ai re difu so
Cer rad o = m ás cuer po
con lo s d edo s
Con cen tra dor
de aire