Conair HC221, Instructions For Care And Use

Page: 1 / 2

Instructions_for_Care_and_Use
MODEL HC221
®
Pro-Style Haircut Kit
with Self-sharpening Stainless Blades
IMPORTANT SAFETY
INSTRUCTIONS
When using electrical appliances, especially when
children are present, basic safety precautions
should always be followed, including the following:
READ ALL INSTRUCTIONS
BEFORE USING
KEEP AWAY FROM WATER
DANGER
— any appliance is electri-
cally live, even when the switch is off.
To reduce the risk of death or injury by electric
shock:
1. Unplug this appliance before cleaning.
2. Do not place or store appliance where it can fall
or be pulled into a tub or sink.
3. Do not use while bathing or in a shower.
4. Do not place in, or drop into, water or other
liquid.
5. Do not reach for an appliance that has fallen
into water. Unplug immediately.
6. Always unplug this appliance from electrical
outlet immediately after using.
DO NOT REACH
INTO THE WATER
WARNING
— To reduce risk of burns,
electrocution, fire, or injury to persons:
1. This appliance should never be left unattended
when plugged in. Do not pull, twist, or wrap line
cord around appliance.
2. This appliance should not be used by, on, or near
children or individuals with certain disabilities.
3. Use this appliance only for its intended purpose
as described in this manual. Do not use attach-
ments not recommended by the manufacturer. Do
not use an extension cord to operate this appli-
ance.
4. Never operate appliance if it has a damaged
cord or plug, or if it is not working properly, if it
has been dropped or damaged, or dropped into
water. Return appliance to a service center for
examination and repair.
5. Keep cord away from heated surfaces.
6. Never drop or insert any object into any opening
on this appliance.
7. Do not place appliance on any surface while it
is operating.
8. Do not use this appliance with a damaged or
broken comb or with teeth missing from the blades,
as injury may occur. Before use, make certain blades
are aligned properly. (See “Care of your Clippers.”)
9. Do not operate outdoors or where aerosol
(spray) products are being used or oxygen is being
administered.
10. Never operate the appliance with the air open-
ings blocked or while on a soft surface, such as
a bed or couch, where the air openings may be
blocked. Keep the air openings free of lint, hair,
and the like.
11. Always attach plug to appliance first, then to
outlet. To disconnect, turn all controls to “OFF”;
remove plug from outlet.
12. Avoid skin contact with moving blades.
13. Check for tangles or kinks in the cord. If the
cord does become tangled during use, turn unit off
and straighten cord before operating.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This appliance is intended for household use.
Use on Alternating Current (120V AC 60Hz)
only. This appliance has a polarized plug (one
blade is wider than the other). As a safety
feature, this plug will fit in the outlet only one way.
If the plug does not fit fully in the outlet, reverse the
plug. If it still does not fit, contact a qualified electri-
cian. Do not attempt to defeat this safety feature.
Your new Conair Haircut Kit has everything you
need to achieve professional haircuts at home. Its
powerful high torque motor clipper, with high car-
bon stainless steel blades for long-lasting cutting
precision, features a new 5-position adjustamatic
taper control. Whatever hair length you set the
lever for, the clipper will automatically cut all hair
in that section at the desired length. Also included
are 9 attachment combs for different hair lengths
(including left and right ear taper combs), barber
scissors, a styling comb with angled teeth, a barber
comb with straight teeth, a full-length barber cape,
a case for easy storage, 3 styling clips to assist you
in cutting longer hair styles, a neck brush and a 28
minute step-by-step How-to DVD filled with styling
tips and techniques in both English and Spanish. It
also comes with lubricating oil, a cleaning brush
and a blade guard for easy maintenance and pro-
tection of the clipper blades.
THE CONAIR GUIDE
TO CUTTING HAIR AT HOME
Before you start:
1. Inspect your clipper. Make sure it’s free of hair
and dirt, properly oiled, and running smoothly.
2. Place cape around the neck of the person getting
a haircut.
3. Seat the person so that his or her head is at
your eye level.This gives you greater visibility
and control.
4. First, comb hair until it’s tangle-free. Then hold
clipper in a comfortable grip. Now you’re ready
to cut.
MEDIUM TO LONG CUT
To begin with, cut only a small amount
of hair until you become used to the length each
attachment leaves the hair. Try the longest attach-
ment comb and put the taper control in the high-
est setting. If you want a shorter cut, you can then
use shorter combs.
• Short attachment comb (number 1) cuts hair to 1/8".
• Medium-Short attachment comb (number 2) cuts hair
to 1/4".
• Medium-Long attachment comb (number 3) cuts hair
to 3/8".
• Long attachment comb (number 4) cuts hair to 1/2".
• Long attachment comb (number 5) cuts hair to 5/8".
• Long attachment comb (number 6) cuts hair to 3/4".
• Long attachment comb (number 7) cuts hair to 7/8".
• Left ear attachment comb lightly tapers over left ear.
• Right ear attachment comb lightly tapers over
right ear. These combs make this part of the
haircut easier.
Attach combs by hold-
ing them teeth up, then
snapping them onto the
bottom of the clipper
blade.
To remove comb attach-
ments, place index
finger and thumb as
illustrated; then pull out
and up.
NOTE: Never push or shove the clipper through
the hair to make it move more quickly.
Professional experience shows that the clipper
works most efficiently when it cuts through
the hair at its own speed.
To begin cutting hair:
1. The hair should be combed in its natural
direction.
2. Using the largest attachment comb, trim sides
from the bottom upward. Hold
clip per lightly against the hair
with teeth of the attachment
comb pointing up ward, yet flat
against the head.
Gradually lift the clip per
upward and outward through
the hair, trimming just a little at a time.
Repeat around sides and back of head.
If you want hair to be even
shorter:
A) Apply more pressure to
the head with the attach-
ment comb that is in place.
This takes a little practice,
of course.
OR
B) Just switch to a shorter
attachment comb.
Remember, it’s better to
leave too much hair than
too little. For longer hair
on top, use the barber
comb and lift hair on the
top of the head, cutting
over the comb, or hold the
hair between the fingers
and cut to desired length.
Always working from the
front to the back of the
head, gradually cut the
hair shorter by reducing
the space between the comb or fingers and the
head. Comb often to check for uneven strands,
and to get rid of trimmed hair.
OUTLINING
Outlining requires no attachments. Comb
hair into the desired style. Position the
clipper between the sideburns and the ear (see
below), making sure the corner edge of the
blade is against the hairline. With the outline of
the hair as your guide, slowly move the clipper
over, around and behind the ears. For the back
of the neck and the sideburns, hold the clipper
upside down (see above) and, holding it against
the skin at the length desired, move the clipper
downward.
STOP. COMB. CHECK.
For best results, do as the professionals do: comb
hair often, and check clipping results as you
comb. This way you avoid uneven sides, bangs,
neckline, etc.
SHORTCUTS TO PERFECT
FLAT TOPS, CREW CUTS, ETC.
Always cut from the back of the neck to the
crown, using the longest comb setting. Hold the
comb attachment flat against the head and slowly
move the clipper up through the hair. Use the
same technique for the sides, cutting from the
bottom to the upper side of the head.
For the front to the crown, cut the hair against
the direction in which it grows, then even it up
with the sides.
For a flat top, use the flat comb, not the attach-
ment comb. Just cut hair on top of the head over
flat comb (see above).
To taper hair down to the neckline, use attach-
ment comb #1. Comb hair and check for uneven
spots. Outline sideburns and neck areas (see
“Outlining”).
USER MAINTENANCE
CARE OF YOUR CLIPPERS
MAINTENANCE OF THE BLADE
This clipper comes with a removable blade set.
To remove the blades follow
these steps:
1. Hold the front part of the
clipper with your thumb
pressing on the blade and
place another hand against
the blade. (see fig. 1)
2. When pressing the
blade forward, the blade is
detached. (see fig. 2)
TO REPLACE BLADES:
1. Set the Taper Control
Button to lowest position
“1” (see fig. 3)
2. Place the blade onto the
clipper body by inserting
the “Blade Tongue” down
below the “Lock Tap”.
(see fig. 4)
3. Snap the blade down
into following position. The
blade is now fixed onto the
clipper body. (see fig. 5)
SPECIAL OIL
Always apply oil to the blades before, during or
after use. This will ensure maximum cutting per-
formance. Hold clipper away from your body in a
downward position and apply oil on the front and
sides of the cutter blade. Wipe excess oil off with
a soft, dry cloth.
To maintain the blades of your Conair clipper, oil
them after every three or four haircuts. Gently
place a few drops of oil on the teeth of the blades,
using the special Conair oil included with your set.
Turn the clipper on for
a minute, then turn
off. This light, natural
oil was formulated
specifically for the Conair high speed clipper.
Be cause it is the right oil to use, it will not slow
down the blades. Never use any other product.
There is no substitute for Conair oil.
Any other servicing should be performed by an
authorized service representative or that the
appliance has no user serviceable parts. The
product is for household use. Do not pull, twist, or
wrap line cord around appliance.
ADJUSTABLE 5 DETENT
TAPER CONTROL
The Conair taper control is positioned at the back
of the unit so you can hold the clipper in your
hand and adjust the lever at the same time...while
you’re clipping. This taper control eliminates the
need in some situations for an attachment comb,
because it lets you gradually adjust the closeness
of the cut. For the closest cut and the shortest hair,
push taper control up as far as it will go to level
#5. To increase cutting length, slowly push control
down. If you push to the lowest position level #1, it
will leave hair about the same length as the short
attachment comb.
Because a different cutting edge is used in each
setting, the taper lever lengthens the life of your
blades. Packed-in hair can slow down any clipper.
To remove it without removing the blades, take
your cleaning brush and brush the hair from the
blades. If you do this after every clipping, espe-
cially with heavy hair cutting, the blades should
remain free of cut hair. If clipper stops cutting and
this action doesn’t help, try loosening the blades
to remove the hair.
If clipper stops cutting, check to see if there
is a clump of hair lodged between the blades.
If that is the problem, unplug the clipper and
then loosen the blades to remove the hair.
This clipper has a detachable blade that
makes cleaning easy. Just push up on the
top of the blade and it will pop off easily.
Remove any loose hair with the cleaning
brush provided and then place blade back
in position. To secure properly, line up the
base of the blade with the lower back of the
clipper. Push down into place until you hear
a snap to know it’s locked in place.
If the clipper stops cutting but does not stop
running, you will need to check the blades.
For new blades, send check or money order for
$6.50 which includes postage and handling to:
Conair Corporation
150 Milford Rd.
East Windsor, NJ 08520
NOTE:
Never pull on the clipper cord. Never
twist or wrap the cord around the
clipper. To store your clipper, lay it flat with
the cord coiled up, then place in cylinder.
MED IDA S D E SE GUR IDA D
IMP ORT ANT ES
Cua ndo s e usa n apa rat os elé ctri cos , e spe cia l-
men te en la pre sen cia de ni ños , s iem pre se de ben
tom ar p rec auc ion es bás ica s d e s egu rid ad, en tre la s
cua les la s s igu ien tes :
LEA TO DAS LA S
INS TRU CCI ONE S A NTE S D E
USA RLO
MAN TEN GA EL A PAR ATO
ALE JAD O D EL A GUA
PELIGRO
— Cua lqu ier ele ctro dom ésti co
per man ece e léc tric am ent e a ctiv o, inc lus o c uan do el
int erru pto r e stá a pag ado . P ara re duc ir el ries go de
mue rte o her ida po r d esc arg a:
1. D esc one cte el apa rat o a nte s d e lim piar lo.
2. N o c oloq ue ni g uar de el a par ato do nde pu eda ca er o
ser em puja do a u na bañ era o un lav abo .
3. N o lo us e m ien tra s s e e sté ba ñan do o to man do una
duc ha.
4. N o c oloq ue el a par ato ni lo de je cae r a l a gua u otro
líqu ido .
5. N o in ten te de alca nza r u n a par ato qu e h a c aído al
agu a. D ese nch úfe lo inm edia tam ent e.
6. Siem pre d esc one cte e l a par ato in med iat am ent e
des pué s d e u sar lo
NO TRA TE D E A LCA NZA R
EL A PAR ATO EN EL AG UA
ADVERTENCIA
— Para reducir
el riesgo de quemaduras, electrocución, incendio
o lesiones personales:
1. Nun ca deje e ste a par ato d esa ten dido m ien tra s e stá
con ecta do. No jale , d oble o enr olle el ca ble alre ded or d el
apa rat o.
2. E ste ap ara to no deb ería se r u sad o p or, sob re o c erc a d e
niño s o pe rso nas co n a lgu na disc apa cida d.
3. U se este ap ara to únic am ent e c on el p rop ósit o p ara el
cua l fu e d ise ñad o y ta l c om o s e d esc ribe en es te man ual.
Sólo us e a cce sor ios re com end ado s p or e l fa bric ant e.
4. N unc a u tilic e e l a par ato si el ca ble o la cl avij a e stá n
dañ ado s, s i n o fu ncio na cor rec tam ent e, s i h a c aído , si es tá
dañ ado o s i ha ca ído al agu a. L lév elo a un ce ntro de se rvic io
aut oriz ado pa ra que lo exa mine n y lo rep are n.
5. M ant eng a e l c able ale jad o d e su per fici es c alie nte s.
6. N unc a d eje cae r n i in ser te un obje to en ning una de la s
abe rtu ras .
7. N o c oloq ue el a par ato en ni ngu na sup erfi cie mien tra s
está fu ncio nan do.
8. No use e ste a par ato co n u n p eine a cce sor io rot o o
las tim ado o si l e fa lta n d ien tes a la cuc hilla . E sto po dría
pro voc ar una h erid a. A seg úre se que la s c uch illa s e sté n
cor rec tam ent e a line ada s a nte s d e u sar lo (vé ase la se cció n
“Ins tru ccio nes de m ant enim ien to” ).
9. N o u tilic e e ste ap ara to al a ire lib re, ni d ond e s e e stá n
usa ndo p rod ucto s e n a ero sol (sp ray ) o d ond e s e e stá
adm inis tra ndo ox íge no.
10. Nun ca bloq uee la s a ber tur as de aire o c oloq ue el
apa rat o en un a su per fici e bl and a, c om o un a ca ma o un so fá,
don de se pue dan ob stru ir. M ant eng a la s a ber tur as l ibr es d e
pelu sas , ca bell os y ele men tos sim ilar es.
11. Siem pre co nec te el c able al ap ara to ant es de con ec-
tar lo a la to ma de cor rien te. Par a d esc one cta rlo, co loq ue
tod os los aj uste s e n la po sici ón “Ap aga do” (O FF), lu ego
des enc huf e e l c able .
12. Evit e q ue las cu chil las to que n la p iel cua ndo es tán
mov ien do.
13. Siem pre as egú res e q ue el c able de l a par ato no es té
enr eda do. Si e l c able se en red a o se en roll a m ien tra s e stá
usa ndo el apa rat o, a pág uelo inm edia tam ent e y en der ece el
cab le ant es d e vo lve rlo a u sar.
GUARDE EST AS
INSTRUCCIONES
INSTRUCCIONES
DE USO Est e a par ato fu e d ise ñad o p ara u so dom ést ico .
Úse lo con C orri ent e A lte rna d e 1 20V (6 0 h ertz ios )
úni cam ent e. E ste ap ara to tie ne una cla vija po lar iza da
(un po lo es más an cho qu e o tro ). C om o m edi da de
seg urid ad, se po drá en chu far de u na sol a m ane ra
en la tom a d e c orri ent e p ola riza da. Si no en tra po r
com ple to, in vié rte la. Si aú n n o e ntra co mpl eta men te,
lla me a u n e lec tric ist a c alif ica do. N o in ten te ven cer
est a fu nció n d e s egu rid ad.
Su con jun to de pel uqu ería d e C ona ir® ti ene to do
lo que us ted ne ces ita pa ra log rar co rte s d e c abe llo
pro fes ion ale s e n s u c asa . In clu ye una co rta dor a p ara
el c abe llo co n u n p ote nte m oto r d e ro tac ión rá pid a,
un bot ón de aju ste d e r eco rte c on 5 p osic ion es
y c uch illa s d e a cer o in oxid abl e d uro pa ra un cor tad o
pre ciso . T am bié n in clu ye 9 p ein es acc eso rio s p ara
log rar di stin tos la rgo s d e re cor te (in clu so un pe ine
par a l a o rej a i zqu ier da y u n p ein e p ara la o rej a
der ech a), tije ras d e pel uqu ero , un pei ne de
mod ela do con d ien tes la dea das , u n pei ne de
pel uqu ero c on die nte s rec tas , una c apa d e
pel uqu ero , u na caj a d e a lm ace nam ien to, 3 c lip s
par a e l c abe llo m ás lar go, a cei te lub ric ant e, un
cep illo d e l im pie za, u n c epi llo p ara e l c uel o, y
una c ubi erta p rot ect ora . P or fin , i nclu ye un DVD
edu cat ivo de 28 m inu tos en in glé s y en es pañ ol.
GUÍA DE CONAIR PARA CORTAR
EL CABELLO EN SU CASA
Antes de empezar:
1. Inspeccione el a parato para asegurarse que
esté libre de cabello y polvo, que esté lubricado y
que funcione correctamente
2. Coloque una toalla o una capa de barbero
alrededor del cuello de la persona a quien le va a
cortar el cabello
3. Siente a la persona de manera que su cabeza
esté al nivel de sus ojos para mayor visibilidad y
control
4. Desenrede el cabello, luego coja la cortadora
confortablemente en su mano. Ya está listo para
empezar.
CORTES MEDIANOS A LARGOS
Em pie ce por co rta r p oco ca bel lo, ha sta ac ost um -
bra se al c ort ado de ca da pei ne acc eso rio . U se el
pei ne acc eso rio m ás lar go par a e mpe zar , lu ego
use p ein es acc eso rio s m ás cor tos p ara a cor tar
el c abe llo .
• El pe ine ac ces orio co rto (No .1) cor ta e l ca bell o a 1/8 ”
(3m m)
• El pe ine ac ces orio m edia no- cor to ( No.2 ) co rta el c abe llo a
1/4 ” (6 mm )
• El pe ine ac ces orio m edia no- lar go ( No.3 ) co rta el c abe llo a
3/8 ” (9 mm )
• El pe ine ac ces orio lar go ( No.4 ) co rta el c abe llo a 1 /2”
(13 mm )
• El pe ine ac ces orio lar go ( No.5 ) co rta el c abe llo a 5 /8”
(16 mm )
• El pe ine ac ces orio lar go ( No.6 ) co rta el c abe llo a 3 /4”
(19 mm )
• El pe ine ac ces orio lar go ( No.7 ) co rta el c abe llo a 7 /8”
(22 mm )
• El pe ine ac ces orio pa ra l a or eja izq uier da c onto rne a la
ore ja i zqu ier da
• El pe ine ac ces orio pa ra l a or eja der ech a co ntor nea la ore ja
der ech a
Par a ens am bla r el
pei ne acc eso rio , sos -
tén gal o c abe za arr iba y
eng ánc hel o e n l a p arte
inf erio r d el f ilo de la co r-
tad ora .
Par a qui tar e l pei ne
accesorio, cójalo entre
los dedos índice y pul-
gar, tal como se ve en
la ilustración, y jale el
pei ne hac ia arr iba y
afuera.
NOTA: Nunca empuje la cortadora para que
corte más rápidamente. La experiencia profe-
sional demuestra que funciona mejor cuando
corta a su propia velocidad.
Empezar el corte de cabello:
1. P eine el cabello en la dirección de su creci-
miento na tural.
2. Empiece el recorte a un lado de la cabeza,
usa ndo e l pei ne acc eso rio
más largo, y cortando de abajo
hacia arriba. Sostenga la cor -
tadora ligeramente contra el
cabello con los dientes del
peine apuntando hacia arriba
y plano contra la cabeza. P ase
la cortadora en el cabello gradualmente hacia
arriba y hacia fuera, cortando un poco cada vez.
Repita al otro lado y atrás
de la cabeza.
Si qui ere u n cor te de
cabello aún más corto:
A) Apl iqu e más p res ión
con e l pei ne acc eso rio .
Esto necesita al principio
un poco de práctica.
O
B) Cam bie el pei ne
acc eso rio p or uno m ás
corto. Recuérdese que es
mej or dej ar dem asi ado
cabello que muy poco.
Si quiere dejar el cabello
más l arg o enc im a de
la cabeza, use el peine
de barbero o sus dedos
para levantar el cabello y
corte a lo largo deseado.
Trabaje siempre de adel-
ante por atrás de la cabeza y corte el cabello poco
a poco, reduciendo el espacio entre sus dedos o
el peine y la cabeza. P eine con frecuencia para
verificar que no hay a mechones disparejos y para
eliminar el cabello cortado.
CONTORNEO
El contorneo no requiere accesorios. P eine
el cabello en el estilo deseado. Coloque la
cortadora entre las pa tillas y la oreja (véase
el dibujo) y asegúrese que la esquina de la
cuchilla se encuentre contra el nacimiento
del pelo. Mueva la cortadora lentamente
sobre, alrededor y por atrás de las orejas,
siguiendo la forma del cabello. P ara cortar
el pelo en la nuca y las pa tillas, sosten-
ga la cortadora al revés (véase el dibujo),
colóquela contra la piel al nivel deseado y
muévala hacia abajo.
DET ÉNG ASE . P EIN E. V ERI FIQ UE
Para resultados óptimos, siga el ejemplo de los
profesionales: peine el cabello con frecuencia
y verifique los resultados mientras peine. Esto
evitará tener lados, flequillos o líneas de nuca
disparejos.
PERFECTOS COR TES CON
CORONILLAS PLANAS, COR TES
MILITARES ETC.
Siempre corte el cabello desde la parte trasera
de la nuca hacia la coronilla, usando el peine
accesorio más largo. Sostenga el peine contra
la cabeza y mueva la cortadora lentamente en el
cabello hacia arriba. Use la misma técnica para
los lados, cortando desde abajo hasta la parte
superior la teral de la cabeza.
Para la parte delantera, corte el cabello en la
dirección contraria a la del crecimiento natural del
cabello, luego iguale los lados.
Para una coronilla plana, use un peine plano en
vez de un peine accesorio, y corte el cabello
encima del peine (véase el dibujo).
Para cortar el pelo en la nuca y en las pa tillas,
use el peine accesorio No.1 (V éase la sección
“Contorneo”).
INS TRU CCI ONE S D E
MAN TEN IM IEN TO
COR TAD ORA PA RA EL CAB ELL O
JUE GO DE CUC HIL LAS AM OVI BLE S
El apara to inc luye un juego de cuchillas amovible.
Siga las instrucciones siguientes para sacar las
cuchillas:
PARA SACAR LAS CUCHILLAS
1. Sostenga la cortadora
con el botón de encendido/
apa gado frente suyo. P onga
una mano debajo de las
cuchillas y empuje las mismas
con el pulgar de la otra mano
(Fig.1)
2. Empuje las cuchillas hacia
delante hasta desencajarlas
(Fig.2)
PARA INSTALAR LAS
CUCHILLAS
1. P onga la palanca regula-
dora en la posición más baja
“1” (F ig.3)
2. Inserte la lengüeta negra
del juego de cuchillas en la
hendidura de la cortadora
(Fig.4)
3. A priete el juego de cuchillas
para sujetarlo (Fig.5)
ACE ITE ES PEC IAL
Par a m ant ene r l as cuc hill as de su cor tad ora e n
con dic ión ó ptim a, lub ríq uel as des pué s d e t res o
cuat ro cor tes d e c abe llo , ap lic and o u nas cu ant as
got as de ace ite lu bric ant e e n l os die nte s d e l as
cuc hill as. Enc ien da
la cor tad ora d ura nte
un min uto , lue go
apá gue la. E l ace ite
lub ric ant e fue
esp ecí fic am ent e d ise ñad o p ara la s c orta dor as de
alta v elo cid ad de Con air® . P orq ue es el ace ite
ade cua do, no re duc irá la ve loc ida d d e la s c uch illa s.
Nun ca use ot ro ace ite pa ra lub ric ar s u ap arat o. N o
hay ni ngú n s ubs titu to al a cei te de Con air.
BOTÓN DE AJUSTE DEL RECOR TE
CON 5 POSICIONES
Su cor tad ora es tá equ ipa da con un bo tón de aj ust e
del re cor te, ub ica do en la par te tra ser a d el a par ato ,
el cua l l e p erm ite c ont rol ar lo lar go del re cor te a
med ida qu e c orta el ca bel lo.
En alg uno s c aso s, e l b otó n d e a jus te del re cor te le
per mite co rta r e l c abe llo m ás cor to o m ás lar go, si n
nec esid ad de usa r u n p ein e a cce sor io. Pa ra un cor te
más co rto , m uev a e l b otó n h acia ar rib a. E l n ive l m ás
cor to es el n ive l 1 . P ara un co rte m ás lar go, m uev a
el b otó n le nta men te hac ia aba jo. El ni vel m ás lar go
es el n ive l 5 . E l a jus te más la rgo de jar á e l c abe llo ta n
cor to com o e l p ein e a cce sor io cor to No. 1.
Usa r e l b otó n d e a jus te del re cor te pro lon ga la
vid a ú til de las cu chi lla s, p ues to que n unc a u san
el m ism o á ngu lo par a c orta r. S u c orta dor a p ued e
per der v elo cid ad si rec orte s de cab ello e stá n
tra bad os en las cu chi lla s. P ara lim pia rla s s in ten er
que re mov erla s, u se el c epi llo de lim pie za pro vis to.
Hac er est o d esp ués d e c ada u so, e spe cia lm ent e
cua ndo s e c orta m uch o c abe llo , m ant end rá las
cuc hill as en con dic ión óp tim a. S i la co rta dor a d eja
de fun cio nar , y qu e e sto no so luc ion a e l p rob lem a,
des enc húf ela y aflo je las cu chi lla s p ara lim pia rla s.
Si l a c orta dor a d eja d e c orta r, p ero si gue fu nci o-
nan do, in spe cci one la s cuc hill as. C ám bie las s i
est án em bot ada s. Pue de ped ir nue vas c uch illa s
por co rre o, m and and o u n c heq ue o u n g iro po sta l
de $6, 50U S (i ncl uye ga sto s d e e nví o y m ane jo) a la
dire cci ón más ab ajo .
Conair Corpora tion
150 Milford Rd.
East Windsor , NJ 08520
Nota: Nunca jale, tuerce o enrolle el cable
alrededor del aparato. Cuando no use el
aparato, deje el cable libre al lado del
aparato y guarde el aparato sobre una
superficie plana o adentro del cilindro de
almacenamiento previsto.
Instrucciones de uso y de mantenimiento
MO DE LO HC 221
®
Co njun to d e P elu qu erí a
co n cu ch illas d e ace ro
in ox id ab le c on a uto afi la do