KNOW EVERYTHING ABOUT THE HAIR DESIGNER
™
BY CONAIR
®
KNOW EVERYTHING ABOUT THE HAIR DESIGNER
™
BY CONAIR
®
ROOTS
1. Select the vertical position for the straightener attachment.
2. Separate a section of hair about 1½" wide. Hold the dryer (detangling comb
facing out) under the section of hair and place it at the roots ensuring that
the teeth penetrate the hair fully.
3. Gently pull the dryer to about 1" from the roots and turn under: this will give
the action of the Tourmaline Ceramic
™
and flocked disks maximum effect.
4. Hold the dryer parallel to your scalp for 5 seconds.
5. Then slide the appliance slowly towards the ends.
6. Repeat if necessary and finish with a shot of cool air on the section of hair for perfect hold.
STRAIGHTENING AROUND THE CONTOURS OF THE FACE
Select the diagonal position for the straightener attachment. Then follow
instructions under 2, 3, 4, 5 and 6 described above.
Flip Outwards
1. Select the vertical position for the straightener attachment.
2. Separate a section of hair about 1½" wide. Hold the dryer (detangling comb facing down) over
the section
of hair.
3. With a slight twisting motion of the wrist, turn the appliance over and slide it slowly towards the
ends, using your free hand if necessary to turn the hair up. Then follow instructions under 4 and 5
described on previous page.
Summary of Contents for hair designer 208C
Page 16: ...HAIR DESIGNER BY CONAIR...