Removing the Steamer Hose
(make sure unit has cooled)
To remove, turn counterclockwise
one quarter turn, then push down
and continue to turn until it releases.
Turn slowly.
Hose may be stiff upon removal from box.
Hose will relax after initial use. T-handle
will sit properly on door hook once hose
is relaxed.
IMPORTANT
SAFETY
INSTRUCTIONS
When using electrical appliances, especial-
ly when children are present, basic safety
precautions should always be taken,
including the following:
READ ALL INSTRUCTIONS
BEFORE USING
DANGER —
Any appliance is electrical-
ly live even when the switch is off.
To reduce the risk of death by electric shock:
1. Always “unplug it” immediately after using.
2. Do not place or store appliance where it
can fall or be pulled into a tub or sink.
3. Do not place in, or drop into water or
other liquid.
4. If an appliance falls into water, “unplug it”
immediately.
Do not reach into the water.
WARNING —
To reduce the risk of burns,
electrocution, fire, or injury to persons:
1. Do not overfill steamer as it can cause
hot water to boil out and burn.
2. Close supervision is necessary when
this appliance is used near children or by
the physically challenged. Unsupervised
use could result in fire or personal injury.
This appliance is not recommended for use
by children.
3. Use this appliance only for its intended
use as described in this manual. Do not
use attachments not recommended by the
manufacturer.
4. Never operate this appliance if it has a
damaged cord or plug, if it is not working
properly, or if it has been dropped or dam-
aged, or dropped into water. Do not
attempt to repair the appliance. Incorrect
reassembly or repair could cause a risk of
fire, electric shock, or injury to persons
when the appliance is used. Return the
appliance to an authorized service centre
for examination and repair.
5. Keep the cord away from heated sur-
faces. Do not allow cord to contact heated
surfaces. Do not pull or twist cord. Let
appliance cool completely before putting
away. Loop cord loosely around appliance
when storing.
6. Do not use outdoors or operate where
aerosol (spray) products are being used or
where oxygen is being administered.
7. To reduce likelihood of circuit overload,
do not operate another high wattage appli-
ance on the same circuit.
8. While it is not recommended, if an
extension cord is absolutely necessary, a
15 ampere rated cord should be used.
Cords rated for less amperage may over-
heat. Care should be taken to arrange the
cord so that the cord cannot be pulled or
tripped over.
9. Use caution when changing attachments.
Please be sure the unit is off and no steam
is being released to avoid contact with hot
water.
10. Use caution when changing attachments
as they may contain hot water from
condensation. T-nozzle should never be
placed on the unit when in use or when pre-
heating. Ensure the attachments are dry or
cooled off to avoid contact with hot water.
11. Do not hold steamer during use. Steamer
must sit on floor while steaming.
12. Allow unit to cool before emptying reser-
voir for storage.
13. Use caution when removing hose cap.
Remove slowly.
14. Do not use if unit has been dropped or
damaged.
CAUTION —
1. This appliance should never be left unat-
tended when plugged in.
2. This appliance has a polarized plug (one
blade is wider than the other). As a safety
feature, this plug will fit in a polarized out-
let only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still
does not fit, contact a qualified electrician.
Do not attempt to defeat this safety feature.
3. Never drop or insert any object into any
opening or hose.
4. Do not place the steam nozzle directly on
any surface or on the appliance power
cord while it is hot or plugged in. Use the
door hook provided.
5. This product emits hot steam during use.
Do not touch t-nozzle when product is in
use.
6. Do not steam garments while on a person.
7. Before unit is turned onthe hose must be
extended and hanging on door hook.
8. Never yank cord to disconnect from out-
let, instead, grasp plug and pull
to disconnect.
9. Burns could occur from touching hot
metal parts, hot water, or steam. Use care
when you turn a steam appliance upside
down - there may be hot water in reservoir.
10. Use caution when carrying steamer as
it contains hot water.
11. Caution: hose will be hot when in use.
Avoid prolonged contact.
SAVE THESE
INSTRUCTIONS
FOR HOUSEHOLD USE ONLY
NOT FOR COMMERCIAL OR
INDUSTRIAL USE
UNPACKING INSTRUCTIONS
Place the box on a large sturdy flat surface.
Carefully remove the appliance from the
packing material. Keep all plastic bags away
from children.
STEAMER ASSEMBLY
Attaching the Steamer Hose
Insert hose cap into steamer housing and
twist clockwise to securely lock hose onto
housing.
OPERATING
INSTRUCTIONS
FILLING THE WATER RESERVOIR
(PRIOR TO PLUGGING IN THE APPLIANCE)
Remove the hose cap. Fill the reservoir with
clean tap water to the desired level or until
water reaches shelf inside container marked
“Max Fill” or “Max Fill” line on side of unit.
DO NOT OVERFILL as this will cause water
to boil out of steamer and spill. Empty until
water is just under the internal fill indicator.
DO NOT FILL THE CONTAINER WITH
HOT WATER.
GETTING TO KNOW
YOUR STEAMER
This steamer comes with the following
accessories:
1. Lint brush: snap onto the T-nozzle and
use before steaming to remove lint from
the fabric.
2. Bristle brush: snap onto the T-nozzle
and use to remove loose dirt and dust
from the fabric before steaming.
3. Rigid comb: sanp onto the T-nozzle,
great for lossening stiff fibers and dents
left in carpets from furniture.
4. Stragihtener (crease attachment): snap
into the T-nozzle, great for maintanining
or creating creases.
OPERATING THE STEAMER
1. Over the door hanger: hang this over
the top of your door and use to hang the
T-nozzle and any garment or hanger.
(Overloading may cause deformation of
door hook.)
1. Make sure the ON/OFF switch is in the
OFF position.
2. Make sure all hose connections are
secure and tight.
3. Hang the t-nozzle on the door hook.
4. Plug the cord into a normal electrical
outlet.
5. Turn the ON/OFF switch to the
ON position.
6.The switch will light to indicate when
power is on.
7. Steam will be produced from the
nozzle in about five to six minutes. Be
sure to keep t-nozzle on the door hook
while heating up.
"T" handle Steam
nozzle with stay cool
handle & turbo
steam jets
On/Off switch
(under handle)
Removable
5' hose with
hose
Built-in
cord wrap
(underneath)
Water reservoir
Lint brush
Bristle brush
Rigid Comb
Straightener
1.
One quarter
turn.
2.
Push down.
3.
Continue turn
until hose is
released.
Overfill indicator
Hose cap
Over the door
hanger
(hang t-nozzle here)
Door hook
hang hole
hanging the t-nozzle
on the door hook
1.Insert.
2.Turn.
3. Lock.
GS5RC IB-5210A 1/11/07 10:22 AM Page 1
