background image

IMPORTANT SAFETY  

INSTRUCTIONS

When using electrical appliances, especially 

when children are present, basic safety 

precautions should always be taken, including 

the following:

READ ALL INSTRUCTIONS  

BEFORE USING

DANGER

 -

 Any appliance is electrically 

live even when the switch is off.
To reduce the risk of death by electric shock:
1. 

Always unplug immediately after using. 

2. Do not place or store appliance where it 

can fall or be pulled into a tub or sink.
3. Do not place in, or drop into water or other 

liquids.
4. If an appliance falls into water, unplug it 

immediately. 

Do not reach into the water.

WARNING

 - 

To reduce the risk of 

burns, electrocution, fire, or injury to persons:
1. Do not overfill steamer as it can cause hot 

water to boil out.
2. This appliance should not be used near 

children or by the physically challenged. 

Unsupervised use could result in fire or personal 

injury. This appliance is not recommended for 

use by children.
3. Use this appliance only for its intended use 

as described in this manual. Do not use attach-

ments not recommended by the manufacturer.

4. 

Never operate this appliance if it has a 

damaged cord or plug, if it is not work-

ing properly, or if it has been dropped or 

damaged, or dropped into water. Do not 

attempt to repair the appliance. Incorrect 

reassembly or repair could cause a risk 

of fire, electric shock, or injury to persons 

when the appliance is used. Return the 

appliance to an authorized service center 

for examination and repair.

5. Keep the cord away from heated surfaces. 

Do not allow cord to contact heated surfaces. 

Do not pull or twist cord. Let appliance cool 

completely before putting away. Loop cord 

loosely around appliance when storing.
6. Do not use outdoors or operate where aerosol 

(spray) products are being used or where 

oxygen is being administered.
7. To reduce likelihood of circuit overload, do 

not operate another high-wattage appliance 

on the same circuit.
8. While it is not recommended, if an exten-

sion cord is absolutely necessary, a 15 

ampere rated cord should be used. Cords 

rated for less amperage may overheat. Care 

should be taken to arrange the cord so that 

the cord cannot be pulled or tripped over.
9. Use caution when changing attach-

ments. Please be sure the unit is off and no 

steam is being released to avoid contact with 

hot water.
10. Use caution when changing attachments as 

they may contain hot water from condensation. 

T-nozzle should never be placed on the unit 

when in use or when pre-heating. Ensure the 

attachments are dry or cooled off to avoid 

contact with hot water.

11. Do not hold steamer during use. Steamer 

must sit on floor while steaming.
12. Allow unit to cool before emptying 

reservoir for storage.
13. Use caution when removing hose cap. 

Remove slowly.

CAUTION -

 

1. 

This appliance should never be left 

unattended when plugged in.

2. This appliance has a polarized plug (one 

blade is wider than the other). As a safety fea-

ture, this plug will fit in a polarized outlet only 

one way. If the plug does not fit fully in the 

outlet, reverse the plug. If it still does not fit, 

contact a qualified electrician. Do not attempt 

to defeat this safety feature.
3. Never drop or insert any object into any 

opening or hose.
4. Do not place the steam nozzle directly on any 

surface or on the appliance power cord while it 

is hot or plugged in. Use the door hook provided.
5. This product emits hot steam during use. 

Do not touch T-nozzle when product is in use.
6. Do not steam garments while on a person.
7. Before unit is turned on, the hose must be 

extended and hanging on door hook.
8. Never yank cord to disconnect from outlet. 

Instead, grasp plug and pull to disconnect.
9. Burns could occur from touching hot metal 

parts, hot water, or steam. Use care when you 

turn a steam appliance upside down – there 

may be hot water in reservoir. 
10. Use caution when carrying steamer, as it 

contains hot water.

11. Caution: hose will be hot when in use. 

Avoid prolonged contact.

SAVE THESE 

INSTRUCTIONS

FOR HOUSEHOLD USE ONLY 

NOT FOR COMMERCIAL OR 

INDUSTRIAL USE

UNPACKING INSTRUCTIONS

Place the box on a large, sturdy flat surface. 

Carefully remove the appliance from the 

packing material. Keep all plastic bags away 

from children.

STEAMER ASSEMBLY

Attaching the Steamer Hose

Insert hose cap into steamer housing and twist 

clockwise to securely lock hose onto housing. 

GETTING TO KNOW YOUR STEAMER 

OPERATING THE STEAMER 

1. Over-the-door hanger: hang this over the 

top of your door and use to hang the T-nozzle 

and any garment or hanger. (Overloading may 

cause deformation of door hook.)

2. Make sure the ON/OFF switch is in the OFF 

position. 
3. Make sure all hose connections are secure 

and tight.
4. Hang the T-nozzle on the door hook  

outwards so as not to let steam hit the door.
5. Plug the cord into a normal electrical outlet.
6. Turn the ON/OFF switch to the ON position.
7. The switch will light to indicate when power 

is on.
8. Steam will be produced from the nozzle 

in about five to six minutes. Be sure to keep 

T-nozzle on the door hook while heating up.
9. To turn steamer off, press ON/OFF switch 

to the OFF position or replace T-nozzle in its 

cradle until you hear a click.

NOTE: 

This steamer is designed to sit on the 

floor. Do not put on a table or chair when in use.

OTHER IMPORTANT NOTES

During operation, the steamer hose may gurgle. 

This is a normal result of condensation col-

lecting inside the hose. Simply lift the T-nozzle 

upward until the hose is extended to its full 

height. The gurgling will disappear when the 

excess moisture inside the hose has had a 

chance to drain back into the base. 

1. Insert

2. Turn

3. Lock

Removing the Steamer Hose  

(make sure unit has cooled)

To remove, turn counterclockwise one quarter 

turn, continue to turn until it releases. Turn 

slowly.
1.One quarter turn.
2. Continue turn until hose 

is released.

Hose may be stiff upon 

removal from box. Hose 

will relax after initial use. 

T-nozzle will sit properly 

on door hook once hose  

is relaxed.

OPERATING

INSTRUCTIONS

FILLING THE WATER RESERVOIR 

(PRIOR TO PLUGGING IN THE APPLIANCE)

Remove the hose cap. Fill the reservoir with 

clean tap water to the desired level or until 

water reaches “Max Fill” line on side of unit. 

DO NOT OVERFILL as this will cause water to 

boil out of steamer and spill. Empty until water 

is just under the overfill indicator. DO NOT 

FILL THE CONTAINER WITH HOT WATER.

T-nozzle with  

stay-cool handle and 

turbo steam jets

ON/OFF switch

(under handle)

Removable  

5-ft. hose 

(Hose material  

varies by model)

Built-in  

cord wrap

(underneath)

Water reservoir

Over-the-door

hook

Overfill indicator

Hose cap

(Hang T-nozzle here)

Door hook  

hang hole

CAUTION: Hose will be hot when  

in use. Avoid prolonged contact.

High Velocity Steam  

Jet T-Nozzle

Reviews: