background image

CLEANING AND STORING

I.  Push the ON/OFF pedal to the OFF position 

 

and unplug from the power source.

2.  Wait for the steamer to cool completely for at 

 

least 30 minutes.

3.  Push cord-reel pedal. Cord will retract into 

 

the unit.

4.  Remove the steamer hose.

5.  Remove  the  water  container  from  unit,  

 

unscrew valve and empty unused contents.  

 

Allow to air dry.

6.  Remove excess water from the reservoir by 

 

lifting the unit and pouring it out.

7.  Collapse telescopic hanger rod.

8.  Replace water container.

9.  Store the unit.

CAUTION: Hose will be hot when 

in use. Avoid prolonged contact.

LOW WATER INDICATOR LAMP

Should the water container run out of water, the 

unit  will  automatically  turn  on  and  off,  cycling 

the low water indicator lamp on and off.

To Reset indicator:

1.  Push power pedal to OFF. Light will go out.

2.  Remove  water  container  and  refill  as  

  described in the operating instructions.

3.  Replace filled water container in unit.

4.  Turn power switch back to ON.

5.  The unit is ready when low water lamp is off 

  and steam comes out from T-nozzle.

Note: 

if  the  low  water  reset  lamp  becomes  il-

luminated, but the water container is not empty, 
follow the instructions for decalcification.

OTHER IMPORTANT NOTES

 

During operation, the steamer hose may gurgle. 

This is a normal result of

Condensation collecting inside the hose. Simply 

lift the “T” handle upward until the hose is ex-

tended to its full height. The gurgling will disap-

pear when the excess moisture inside the hose 
has had a chance to drain back into the base.

DECALCIFICATION

If the appliance begins to produce steam more 

slowly than usual, if the steamer

stops  producing  steam  and 

then  starts  again,  or  if  the 

low water indicator lamp

illuminates even with water 

container full, you may need 

to  decalcify  your  steamer. 

Decalcification  refers  to  re-

moving the calcium deposits 

which form over time on the 

metal  parts  of  the  Steamer. 

For  best  performance  from 

the Conair Garment Steamer, 

decalcify  the  unit  from  time  to  time.  The  fre-

quency depends upon the hardness of your tap 

water and how often you use the Steamer.

To decalcify, use a solution of 1/3 white vinegar 

and  2/3  water  in  the  water  container.  Replace 

the water container into the unit. Plug the unit 

into electrical outlet. Turn to the ON position and 

run until half the amount has steamed (1 L/34 

oz).Turn the unit to the OFF position, unplug from 

electrical outlet, and allow to sit for 30 minutes. 

Remove water container. Remove excess water 

from  the  reservoir  by  lifting  the  unit,  inverting 

and  pouring  the  unit  over  sink,  and  allowing 

water  to  drain  from  internal  reservoir.  Repeat 

the above procedure as many times as neces-

sary until a normal steam rate returns, usually 

2-3 times. With each repeated cycle, use a fresh 

solution of vinegar and water. Run one cycle of 

fresh, cold water through the unit at the com-

pletion of decalcification, before using the unit 
again to steam garments.

TIPS FOR USE

Steam Technique:

Grasp  the  “T”  handle  steam  nozzle  with  the 

steam jets facing away from you. Begin at the 

bottom of the fabric to allow the steam to rise 

inside  and  outside,  removing  wrinkles.  Slowly 

move the nozzle from the bottom to the top of 

the fabric. Remove the nozzle from the garment 

and smooth the fabric with your free hand. Some 

fabrics are best steamed on the underside of the 

material. This will allow the fibers of the fabric to 

relax, eliminating wrinkles. 

NOTE: 

Test fabric for 

colour fastness in an inconspicuous spot. Drape 

linens, towels, handkerchiefs and napkins over a 

rod or place onto a towel rack.

Heavier fabrics may require repeated steaming. 

Repeat as necessary.

With practice, you will gain speed and efficiency. 

You will soon learn which fabrics require mul-

tiple  steam  applications.  Do  not  directly  touch 

velvet or silk with the steam head.

Always steam with hose in upright posi-

tion, so any condensation is free to flow  

back into the steamer.

If you steam in a low position, condensation will 

collect inside the hose. This will cause gurgling 

and some water droplets to form near the steam 

jets on the “T” handle. To avoid this: frequently 

lift  the  steam  handle  upward  until  the  hose  is 
extended to its full height.

TO STEAM DRAPES:

Wash and dry drapes as directed according to 

fabric type. Re-hang drapes and steam drapes 
when in place.

TROUBLESHOOTING THE STEAMER

• PROBLEM - Steamer fails to heat

  CAUSE - Steamer not plugged in

  SOLUTION - Plug into electrical outlet

• PROBLEM - Auto shut-off engaged

  CAUSE - Water container is empty

  SOLUTION  -  Fill  container  and  reset  low 

  water indicator lamp

• PROBLEM - No steam

  CAUSE - Water level is low

  SOLUTION  -  Push  ON/OFF  pedal  to  OFF  

  and refill water container

• PROBLEM - Water drips from nozzle

  CAUSE - Condensation in hose

  SOLUTION  -  Hold  the  hose  vertically  and  

  allow water to drain back into unit

• PROBLEM - Nozzle gurgles

  CAUSE - Condensation in hose

  SOLUTION  -  Hold  the  hose  vertically  and 

  allow water to drain back into unit

• PROBLEM - Poor steam performance

  CAUSE - Sediment in container

  SOLUTION - Decalcify reservoir and 

  water container

Note: Minerals in water will vary in different 

areas. To ensure continued

operation of the steamer, never store without 

cleaning and removing excess water from the 

reservoir and water container.

ONE YEAR LIMITED WARRANTY

Conair will repair or replace (at our option) your 

unit free of charge for 12 months

from the date of purchase if the appliance is de-

fective in workmanship or materials. To obtain 

service  under  this  warranty,  return  the  defec-

tive product to the service centre listed below 

together with your purchase receipt and $7.50 

for  postage  and  handling.  In  the  absence  of  a 

purchase  receipt,  the  warranty  period  shall  be 

12 months from the date of manufacture.

ANY IMPLIED WARRANTIES, OBLIGATIONS, OR 

LIABILITIES, INCLUDING BUT NOT LIMITED TO 

THE IMPLIED WARRANTY OF MERCHANTABILI-

TY AND FITNESS FOR A PARTICULAR PURPOSE, 

SHALL  BE  LIMITED  IN  DURATION  TO  THE  12 

MONTH DURATION OF THIS WRITTEN, LIMITED 

WARRANTY.

IN  NO  EVENT  SHALL  CONAIR  BE  LIABLE  FOR 

ANY  SPECIAL,  INCIDENTAL,  OR  CONSEQUEN-

TIAL DAMAGES FOR BREACH OF THIS OR ANY 

OTHER  WARRANTY,  EXPRESS  OR  IMPLIED, 

WHATSOEVER.

This warranty gives you specific legal rights, and 

you may also have other rights, which vary from 
province to province.

SERVICE CENTRE:

CONAIR CONSUMER PRODUCTS INC.

100 Conair Parkway

Woodbridge, ON

L4H 0L2

1-800-472-7606

www.conaircanada.ca

Consumer Call Centre E-mail:

[email protected]

©2010 CONAIR CONSUMER PRODUCTS INC.

09CN14296

IB-9333

FABRIC STEAMER

Instructions for Use

For your safety and continued enjoyment 

of this product, always read the instruc-

tion book carefully before using.

professional

Model GS11RRC 

Have a Question?

 

Please do not return 

this product  

to the retailer.

Call Us First! 

Our customer service 
and product experts 
are ready to answer 
ALL your questions.
Please call our  
TOLL-FREE  
customer service 
number at:  
1-800-472-7606
 or visit us online at  
www.conaircanada.ca 

Summary of Contents for GS11RRC







Reviews: