Fig 1
Fig 2
This taper lever eliminates the need for a comb attachment
because it lets you gradually adjust the closeness of the cut.
For the closest cut and the shortest hair, push taper lever up
as far as it will go. To increase cutting length, slowly push
lever down. If you push to the lowest position, it will leave
hair about the same length as the short attachment.
Because a different cutting edge is used in each setting,
the taper lever lengthens the life of your blades.
Packed-in hair can slow down any clipper.
To remove hair without removing the blades, do what the
professionals do: keeping the clipper on, quickly push the
taper lever back and forth from “close” to “longer” cut a
few times.
If you do this after every clipping, especially with
heavy hair cutting, the blades should remain free
of cut hair. If clipper stops cutting and this action
doesn’t help, check the blades. If they’ve become dull,
replace them or return them to a ConairPET
TM
service
center. We’ll be glad to sharpen them for you. For new
blades, send check or money order for $7.50 or insert
order blank which includes postage and handling to:
Conair Consumer Products Inc.
100 Conair Parkway,
Woodbridge, ON L4H 0L2
Longer
cut
Closer cut
CARE OF YOUR CLIPPERS
ADJUSTABLE TAPER LEVER
Just like professional clippers, the ConairPET
TM
taper lever
is positioned at your thumb. You can hold the clipper
in your hand and adjust the lever at the same time...while
you’re clipping.
Cutting Comb (large blade)
Cutter
(small blade)
KEEP AWAY FROM
WATER
Everyone knows that electricity and water are a danger-
ous combination.But did you know that an electric appli-
ance is still electrically alive even if the switch is off? If
the plug is in, the power is on. So when you are not using
your appliances, keep them unplugged.
ALWAYS UNPLUG
SMALL APPLIANCES
WARNING:
IF YOU THINK
THE POWER IS OFF
WHEN THE SWITCH
IS OFF,
YOU’RE WRONG.
