16. Do not use with a voltage converter.
SAVE THESE
INSTRUCTIONS
OPERATING
INSTRUCTIONS
This unit is designed to operate at 120-240 volts
AC. Use on Alternating Current (50/60 hertz) only.
This appliance has a polarized plug (one blade
is wider than the other). As a safety feature, this
plug will fit in a polarized outlet only one way. If
the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a
qualified electrician. Do not attempt to defeat
this safety feature.
DUAL VOLTAGE
This curling iron will automatically adjust to the
proper voltage. Use an adapter plug with correct
configuration prior to use in outlet.
CURLING BASICS
Plug the cord of the iron into any 120V-240V
household outlet. Slide switch to “I” (ON) position;
red light will indicate power is on. The iron will
heat up very quickly. To turn off, slide switch to
“0” (OFF) position and red light will go off. Never
leave your curling iron unattended.
WARNING: The iron’s ceramic-coated barrel
will get extremely hot within a few seconds
after being turned on. Never let the barrel touch
the skin when the iron is on.
TO CURL HAIR
For best results, use a light styling product
before blow-drying hair.
1
Take a 1 inch (2.5 cm) wide section of hair,
starting 2 inches (5 cm) from the scalp.
2
Wind the section of hair around the thicker
portion of the barrel towards the cool tip.
3
Hold the end of the hair in place at the cool
tip for 5 to 8 seconds depending on hair type,
and then release. No clamp allows you to easily
curl hair without kinks. For tighter, bouncier
curls, roll less hair. For loose, free flowing curls,
roll more hair. To “set” the curl, do not comb or
brush hair until it cools.
4
Repeat process on additional sections of hair
until you achieve the hair style you desire. Some
experience is necessary when learning to use
this curling wand. After using several times, you
will learn the ideal way to curl and style your hair.
