INSTRUCTIONS FOR USE
• Plug the appliance into a suitable mains socket and push the on/off
(0/I) button once to switch unit on.
• The temperature will heat up to 180˚C in seconds. You will be able to
view the temperature on the digital display on the outer casing.
• Use the temperature buttons (+/-) to select the desired temperature,
the temperatures will increase or decrease in 10°C increments for
specific temperature control (between 140°C to 230°C).
• The display will flash 3 times to confirm the temperature has
been selected. The display will show the exact temperature when
heating up.
• After use, push the on/off (0/I) button once to switch unit off and
unplug the appliance.
• Allow to cool before storing away.
Temperature Memory Function:
The temperature memory function is suitable when a prefered tempe-
rature is required for each use by pushing the (M) button.
• To programme your desired temperature, ensure the unit is
switched on, then simply select the temperature you require by using
the temperature buttons (+/-) and by viewing the digital display.
• Hold down the (M) memory button for 3 seconds, the display will
flash 3 times to confirm the temperature has been stored. This will
be stored in the straightener’s memory from that point and after being
switched off.
• When you switch the unit back on for next use, simply push the (M)
memory button and your stored temperature will be automatically
selected.
• To reset the stored temperature, simply select a different temperature
(ie. 230°C) and hold down the memory button for 3 seconds and the
new temperature will then be stored.
