Con-Treat Grinder Dolly Safety & Operators & Parts Manual Download Page 3

Page 2 

Safety instructions 

1. Read and understand the instructions on the machine and in this manual and engine manual (if applicable).

Different models may have different parts and controls.

2. Equipment should only be operated by trained personnel, in good physical condition and mental health (not

fatigued). The operator and maintenance personnel must physically be able to handle the bulk weight and
power of this machine.

3. The Dolly must only be used according to the instructions given in this manual. Any other work

 

methods or practices could result in injury or death

4.

This is a one person machine. Maintain a safe operating distance to other personnel. Remember ‘one

machine, one operator’.

5. This equipment is intended for commercial use.

6. For 

the operators’ safety 

and the safety of others, always keep all guards and shrouds in place.

7. Never start or run machine when it is unattended.

8. This machine is only intended for use on floor surfaces such as concrete, terrazzo and other hard floor

surfaces.

9. Never start or run machine when disk(s) are not in contact with the surface.

10. Do not lend or rent machine without the operating and safety instructions for the machine (and the engine, if

applicable).

11. Wear clothing suitable for the job and for the work place including, safety shoes, hard hat, hearing protection,

non-fogging vented safety goggles, and dust mask suitable for dust.

12. Keep body parts or any loose clothing away from moving parts. Failure to comply could result in bodily injury.

13. Do not modify machine in any way. Only use genuine parts and accessories.

14. Repairs should be performed by qualified persons only.

15. Ensure parts have stopped moving and disconnect power or spark plug when servicing or changing blades or

accessories.

16. Never operate machine in rain or if heavy moisture is present.

17. Petrol is extremely flammable and poisonous. Petrol should only be dispensed in well ventilated areas, and

only when engine is cool.

Summary of Contents for Grinder Dolly
















Reviews: