6
Click the
Save to stored
button to save the configuration parameters modified by the
user in the form of a file, which is convenient to directly read the configuration file and
quickly complete the DTU configuration in the future.
Click the "
Load from device
" button to directly read the configuration parameters
from the already configured settings file, and cooperate with the "
Save to Device
"
button to quickly configure the DTU parameters. The operation steps are as follows:
1: Enter the file name, 2: Click "+" to create a new file, 3: Click "Save to Pre-saved
Configuration".
6)
Send the at command through the debugging tool
Not all AT commands are displayed in the interface of the configuration software.
Sometimes it is necessary to directly input AT commands for debugging. To do this, you
can use the AT command debugging tool, click to enter: Command mode, you can enter
the AT command, and then click:
Send the commandline
, thereby executing the AT
command, and the result is displayed in the following window.
