Most Common Set Up
Comwave
Internet
Modem
Computer
Comwave
Home Phone Adapter
*
When used with Comwave Home Phone service
*
Router
Power Bar
with Surge Protector
2
step
7
step
6
step
8
step
Telephone
Cable
Wall Jack
Wi-Fi
4
step
5
step
3
step
Wait!!
5 min.
Wait!!
5 min.
Wait!! 2 min.
1
step
2
step
3
step
4
step
5
step
6
step
7
step
8
step
9
step
Shut down your computer.
Connect the Comwave Internet Modem using a standard
cable wire (not supplied) to the Cable Wall Jack.
Connect the supplied Ethernet cable from your Internet
Modem to the WAN port on your Router.
( For Home Phone)
Connect the supplied Ethernet cable
from the LAN port of your Router to the WAN port of the
Home Phone Adapter.
Connect an Ethernet cable from your computer to any
available LAN port on your Router.
Connect the Comwave Internet Modem to the power
bar and wait until the
ONLINE
light turns on and wait 5
minutes.
Connect the Router to the power bar and wait 2 minutes.
( For Home Phone)
Connect a telephone to the
PHONE 1
port on the Home Phone Adapter.
Then connect power and wait 5 minutes for dial tone.
DO NOT DISCONNECT POWER
as it may damage the
Home Phone Adapter.
Start your computer.
