2
User Information:
Before using the E
Z
Lift-N-Load, read these
installation instructions and familiarise yourself with the
system and process of its use.
This installation manual presents the basic information and
describes precautions involved in the use of the product.
Please adhere to the instructions in this manual for your
own safety and the safety of others. Failure to observe the
instructions may lead to damage to the system and
vehicle, injury to users of the system and vehicle.
It is the responsibility of the user to make sure that the
completed vehicle, with utility bed and accessories, con-
forms to all regulations and applicable laws of the State or
Territory in which the vehicle is to be registered.
Platform lift overview:
1 - Lift platform
2 - Release latch
3 - Lift switch
4 - Activation key barrel
5 - Ratchet straps
6 - Pull handle
7 - Lift mast
EZ Lift-N-Load WARNINGS:
1 - Maximum lift capacity for TC-XXXX is 250kgs or
550lbs
2 - Never exceed the maximum permissible loading of
the EZ Lift-N-Load.
3 - Always uniformly distribute the load across the base
platform. Loads that extend beyond the platform could be
considered as over loading the unit and not safe
4 - Never expose the electronic system to water or liquid
as it could make the unit unusable
5 - Never lift people with the EZ Lift-N-Load. This could
lead to serious injury or death
6 - When operating this unit the ground should be su
ffi
-
ciently
fl
at and
fi
rm
7 - Always have the vehicle in Park (or First Gear) and
the Handbrake engaged
8 - Be aware of potential pinch points and stay well clear
when raising and lowering a load.
9 - Never attempt to modify or install add-on lifting acces-
sories yourself
10 - Watch out for hazards
11 - After use, always place the EZ Lift-N-Load in the
transport position
12 - Check the locking mechanism are properly located
1
2
3
4
5
6
7
