RocketLinx WR7802-XT Series User Guide
: 2000638 Rev. A
Checking the Firmware Version - 23
Using PortVision DX
6.
Optionally, enter the serial number, which is on a label on the WR7802-XT.
7.
Select
DHCP IP
or
Static IP
for the
IP Mode
.
•
If you select
DHCP IP
, go to
.
•
If you select
Static IP
:
-
Enter a unique
IP address
as required for your site.
-
Enter a valid
Subnet Mask
value for your network.
-
Enter a valid
Default Gateway
value for your network.
8.
Optionally, select the
Network Topology
type, which is an informational field.
9.
Click
Apply Changes
to update the network information on the WR7802-XT.
Note:
If you are deploying multiple WR7802-XT switches that share common values, you can save the
configuration file and load that configuration onto other WR7802-XT switches. See
on Page 28 for more information.
10. Click
Close
to exit the
Properties
window.
11. You should verify that you have the latest firmware loaded on the WR7802-XT because a newer version
typically includes feature enhancements and bug fixes. Refer to
12. If you have the latest firmware, you can begin feature configuration, see one of these sections:
•
Configuration Using the Web User Interface
•
Configuration Using the Command Line Interface (CLI)
•
Right-click the WR7802-XT in the
Device List
pane and click
Webpage
in the popup menu.
Note:
The default User Name and Password are both
admin
.
Checking the Firmware Version
Checking your web interface version is easy in PortVision DX.
Comtrol recommends loading the latest firmware so that you have all of the latest feature enhancements and
bug fixes.
1.
If the WR7802-XT is not displayed in PortVision DX, click the
Scan
button.
2.
Select the Comtrol Ethernet attached product type and click the
Scan
button.
Beta
Version
