RocketLinx WR7802-XT Series User Guide
: 2000638 Rev. A
Set the Switch Settings - 125
Configuration Using the Command Line Interface (CLI)
Set the Switch Settings
This example illustrates the set switch settings command. The first entry shows the set switch commands, the
second entry shows the commands for gi3, the third entry shows the commands for the state command, the
fourth entry shows enabling the gi3 port, and the last entry verifies that the change has been made.
This example shows how to add VLAN 2 to Ports 1 and 2 as untagged and Ports 3 and 5 as tagged.
Beta
Version
