manualshive.com logo in svg

Comtrend Corporation WAP-EN1750W, User Manual

Share
Download
Comtrend Corporation WAP-EN1750W User Manual Download Page 90

 

 

System 

Model 

Displays the model number of the access 
point. 

Product Name 

Displays the product name for reference, 
which consists of “AP” plus the MAC address. 

Uptime 

Displays the total time since the device was 
turned on. 

Boot From 

Displays information for the booted 
hardware, booted from either USB or internal 
memory. 

Version 

Displays thefirmware version. 

MAC Address 

Displays the access point’s MAC address. 

Management VLAN 
ID 

Displays the management VLAN ID. 

IP Address 

Displays the IP address of this device. Click 
“Refresh” to update this value. 

Default 

Gateway 

Displays the IP address of the default 
gateway. 

DNS 

IP address of DNS (Domain Name Server) 

DHCP Server 

IP address of DHCP Server. 

 

Wired LAN Port Settings 

Wired LAN Port 

Specifies which LAN port (1 or 2). 

Status 

Displays the status of the specified LAN port 
(connected or disconnected). 

Summary of Contents for WAP-EN1750W













































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands