65
Option
Description
Enable Wireless
Multicast
Forwarding
Select the checkbox
to enable this function.
Enable WiFi
Button
Select the checkbox
to enable the WiFi button.
SSID
[1-32
characters]
Sets the wireless network name. SSID stands for Service Set
Identifier. All stations must be configured with the correct SSID to
access the WLAN. If the SSID does not match, that user will not
be granted access.
BSSID
The BSSID is a 48-bit identity used to identify a particular BSS
(Basic Service Set) within an area. In Infrastructure BSS
networks, the BSSID is the MAC (Media Access Control) address
of the AP (Access Point); and in Independent BSS or ad hoc
networks, the BSSID is generated randomly.
Priority
Sets priority level to SSID from 0-3. Packet flow with high priority
SSID will be processed in advance if congestion occurs.
Wireless -
Guest/Virtual
Access Points
This router supports multiple SSIDs called Guest SSIDs or Virtual
Access Points. To enable one or more Guest SSIDs select the
checkboxes
in the
Enabled
column. To hide a Guest SSID
select its checkbox
in the
Hidden
column.
Do the same for
Isolate Clients
and
Disable WMM Advertise
.
For a description of these two functions, see the previous entries
for “Clients Isolation” and “Disable WMM Advertise”. Similarly, for
Enable WMF
,
Max Clients
and
BSSID
, consult the matching
entries in this table.
NOTE:
Remote wireless hosts cannot scan Guest SSIDs.
Summary of Contents for NexusLink 3120
