29
Chapter 8 Security Settings
8.1 Client Filter Settings
You can enable client filter to control LAN computers’ access to some ports of the Internet
。
¾
Filter Mode:
You can select either “Permit only” or “Forbid only”.
¾
Access Policy:
Select one number from the drop-down list.
¾
Remark:
A simple description of the configured file. You can also leave it blank.
¾
Start/End IP:
Enter the start/end IP address.
¾
Port:
Enter the controlled TCP/UDP protocol port. You can specify a port or port
range.
¾
Type:
Select one protocol (TCP/UDP/Both) from the drop-down list.
¾
Time:
Select the time range of client filter.
¾
Date:
Select the day(s) to run the access policy.
¾
Enable:
To enable/disable the access policy (forbid/permit the packets matched with
the access policy to pass through the router.
Example1
Forbid LAN computers at the IP addresses of 192.168.0.100--192.168.0.120 to
access the Internet.
Example 2
Permit LAN computer with the IP address of 192.168.0.145 to access
websites during 8:00 to 18:00 from Sunday to Saturday.
