36
Chapter 6
Advanced Setup
This chapter explains the following screens:
6.1
WAN
This screen allows for the configuration of WAN interfaces.
To
Add
a new WAN connection, click the
Add
button. To edit an existing
connection, click the
Edit
button
next to the connection. To complete the
Add
or
Edit
go to
in section
To remove a connection
select its radio button under the
Remove
column
of the table
and click the
Remove
button under the table.
Heading Description
VPI/VCI
ATM VPI (0-255) / VCI (32-65535)
Con. ID
WAN connection ID number
Category ATM service category
Service
Name of the WAN connection
Interface Name of the interface for WAN
Protocol
Shows the connection type
Igmp
Shows Internet Group Management Protocol (IGMP) status
Nat
Shows Network Address Translation (NAT) status
QoS
Shows Quality of Service (QoS) status
VlanId
VLAN ID is used for VLAN Tagging (IEEE 802.1Q)
State
Shows the connection state of the WAN connection
Remove
Used to select connections for removal
Edit
Used to edit connections
