Comtrend Corporation AR-5381u User Manual Download Page 129

Page: 129 / 206

128

Chapter 8 Management

Click on the link to jump to a specific section:

8.1 Settings

This includes

Settings, and

Default screens.

8.1.1 Backup Settings

To save the current configuration to a file on your PC, click

Backup Settings

. You

will be prompted for backup file location. This file can later be used to recover
settings on the

Update Settings

screen, as described below.

8.1.2 Update Settings

This option recovers configuration files previously saved using

Backup Settings

Press

Browse…

to search for the file, or enter the file name (including folder path)

in the

File Name

box, and then click

Update Settings

to recover settings.

Summary of Contents for AR-5381u















































































































































































































Search results

Summary of Contents for AR-5381u

Reviews:

Related manuals for AR-5381u

Brands by name

Popular brands

Comtrend Corporation AR-5381u, User Manual

Search results

Summary of Contents for AR-5381u

Reviews:

Related manuals for AR-5381u

Brands by name

Popular brands