Comtech EF Data CRS-300 Installation And Operation Manual Download Page 213

Page: 213 / 298

CRS-300 1:10 Redundancy Switch

MN/CRS300.IOM

Front Panel Operation

Revision 19

6–21

Use the

◄

►

arrow keys to select NO or YES, and then press [ENT]. If you select YES, this will

overwrite the existing configuration at the selected location.

6.2.5.2 STORE/LD: LOAD

LOAD CONFIGURATION FROM
LOCATION: 10 (ENTER)

Use the

▲

▼

arrow keys to select the location from where to load the desired configuration,

and then press [ENT]. Locations 1 through 10 are available. If the location contains a valid stored

configuration, this message displays:

THE NEW CONFIGURATION
HAS BEEN LOADED (ENTER)

Press [ENT] or [CLR] to return to the previous menu. If, however, the selected location does not

contain a previously stored configuration, this message displays:

WARNING! LOC 10 CONTAINS
NO DATA! (ENTER)

Press [ENT] or [CLR] to return to the previous menu.

6.2.6 SELECT: UTILITY

UTILITY: SET-RTC DISPLAY
SWITCH-ID TEST RELAY (ENT)

Use the

◄

►

arrow keys to select from the choices shown, and then press [ENT]. This submenu

permits you to select from a number of different utility functions.

6.2.6.1 UTILITY: SET- RTC (Set Real-Time Clock)

EDIT REAL TIME CLOCK:
12:00:00 24/04/14 (ENT)

To edit the time and date: Use the

◄

►

arrow keys to select a digit, and then use the

▲

▼

arrow keys to edit that value. Press [ENT] when done. Note that the date is shown in

DD/MM/YY format, in accordance with international convention.

6.2.6.2 UTILITY: DISPLAY (Display Brightness)

EDIT DISPLAY BRIGHTNESS:
100% (PRESS ENTER)

Use the

▲

▼

arrow keys to select a VFD brightness level of 25%, 50%, 75% or 100%, and then

press [ENT].

Summary of Contents for CRS-300










































































































































































































































































































Search results

Summary of Contents for CRS-300

Reviews:

Related manuals for CRS-300

Brands by name

Popular brands

Comtech EF Data CRS-300, Installation And Operation Manual

Search results

Summary of Contents for CRS-300

Reviews:

Related manuals for CRS-300

Brands by name

Popular brands