Comtech EF Data CIM-550, Installation And Operation Manual

Page: 154 / 460

CiM-550 IP Enabled Satellite Modem Rev. 2
CLI and Telnet Interface CD/CIM550.IOM
128
11.2.1.7 SNMP
The SNMP Configuration page is activated from the Administration page .
The SNMP Configuration contains the following options/fields:
Menu Options/Fields Entry Description
SNMP Admin Get/Set
Community Read
Only
GET and SET community string for Admin user. This
community string allows GET/SET operations to all
portions of the cimController and cim550 MIBs.
SNMP Read Write Get/Set
Community Read
Only
GET and SET community string for Read Write user.
This community string allows GET/SET operations to
all portions of the cimController and cim550 MIBs,
except for the cimAdministration section in the
cimController MIB.
SNMP Read Only Get/Set
Community Read
Only
GET and SET community string for Read Only user.
This community string allows GET operations in the
cim550 MIB only.
SNMP Trap Destination T IP address where all traps/notifications will be sent. If
a network management application is running in the
network, it should be configured to receive traps and its
IP address should be entered here.
SNMP Trap Community C Community string which will be set in the Community
field of all outgoing traps. This field on the trap PDU
may be checked by the network manager application to
determine if the trap came from a “trusted” agent.
SNMP trap Version V Determines whether a SNMPv1 trap or SMNPv2
notification is sent.
SNMP Enable
Authentication Trap A Determines whether a MIB2 authentication trap will be
sent when a PDU with an invalid community string is
encountered. A community string is invalid when it
does not match the Admin, the Read Write, or the
Read Only community strings.