Wireless ADSL Modem User’s Manual 51
•
Firmware Version:
This is the version of the Wireless Security firmware.
•
WPA Mode:
This field allows you to enable/disable WLAN Security.
•
Network Authentication:
There are two available methods of WLAN Security:
o
WPA RADIUS:
This option uses 802.1X for authentication with
RADIUS server while using TKIP encryption.
o
WPA Pre-Shared Key:
This option uses a pre-shared key (psk) for
authentication while using TKIP encryption.
•
Data Encryption
: support TKIP.
•
WPA Pre-Shared Key:
This is the pre-shared key for use in WPA PSK security
method.
•
WPA Group ReKey Interval (sec):
This is the time-out value for the WPA
Group Key.
Note: With WLAN Security enabled, select “Enable Encryption” and choose WEP
Key ID 2 on the Wireless Page (see previous section). This will allow the 802.1x
client and non-802.1x client to work simultaneously in the 802.1x WLAN security
Method.
•
RADIUS Server Address:
This is the IP address of the RADIUS server.
•
RADIUS Server Port:
This is the UDP port of the RADIUS server. Default to
1812
•
RADIUS Shared Secret:
This is the password shared between an 802.11 access
point and the RADIUS server.
User Level Username/Password
This page allows the
user
or
admin
to set the password for the user account.
The User Password can be up to 65 characters (excluding ‘&’).
Note: User Account cannot be used to access FTP server.
