Wireless ADSL Modem User’s Manual
94
It does not matter which order you input these in as long as you sort them into the
correct order once you are finished.
The configuration should look like the following when complete:
Note: It should be clear now how critical it is to sort the policies in the correct order.
For example, if policies one and two were switched, there would be NO HTTP access
to any computer in the LAN. This would make web browsing impossible.
Outbound Policy
Sample Configuration:
You want to deny all access to the WAN except for the
following:
•
HTTP access from any IP through TCP.
•
Any access from 10.0.0.3 through any protocol.
•
FTP Access from 10.0.0.3~10.0.0.6 through any protocol
Converting the access requirements from above so that the Outbound Policy can
understand them yields the following:
•
Deny all access from any Src (LAN) IP to any Des (WAN) IP through any
source or destination port and through any protocol.
•
Allow access from Src (LAN) IP 10.0.0.3 to any Des (WAN) IP through any
port through any protocol.
•
Allow access from any Src (LAN) IP to any Des (WAN) IP through port
80(HTTP), through TCP.
