PON-3 / Operation
At the data or "record
” view (refer to Figure 10), the total number of records
stored in the meter is shown at the top-left corner next to the wavelength
columns.
The values or word indicators under the header represent the measurements
for each storage record. Figure 10 shows the measurements stored for the
first three data storage.
On the bottom of the page, you will see the following menu:
Skip to the previous 10 memory saves
Skip to the next 10 memory saves
Skip to the previous 100 memory saves
Skip to the next 100 memory saves
Exit out of the record view back to the main menu
X : Deletes the record with the “X” next to it on the right-hand side.
RST: Resets the memory and deletes all records. This cannot be undone. This process will take about 5
seconds to complete. During this time, please do NOT connect or disconnect the power or this can damage the
unit.
Use the up/down arrow keys to select the record on interest. Use the left arrow key (Save) to select the menu
function at the bottom of the screen. The Underline shows the active selection. Press SEL to perform function.
21
Fig. 10: Stored Data View
Fig. 11: Stored Data View
