USB 2.0 Card Reader 17-in-1 User Manual Page 6
9.
Un-Installing the Comsol USB 2.0 Card Reader 17-in-1
Should you feel necessary to remove the installed software and driver files of your
Comsol USB 2.0 Card Reader 17-in 1, please follow the instructions below:
9.1 Windows
®
Un-installation
9.1.1 Un-plug the Comsol USB 2.0 Card Reader 17-in 1 from the USB port
9.1.2 Click
Start
, and then click
Programs
9.1.3 Highlight
USB Mass Storage Reader
and click on
UnInstall
9.1.4 When the dialog box appears to confirm the un-installation, click
Yes
9.1.5 The software and driver will then be automatically removed
9.2 Mac
Un-installation
9.2.1 Repeat steps 1-3 in Mac Driver installation, but in the
Installer Dialog
choose
Uninstall
9.2.2 Click Uninstall to remove driver files. After un-installation, a warning
showing some files/folder could not be deleted may appear. Please
click OK ignoring this message.
10.
Troubleshooting your Comsol USB 2.0 Card Reader 17-in-1
10.1 How to use USB 2.0 Card Reader on Linux system?
The kernel code be should 2.4.0 or later versions. Then, the kernel code
must be edited manually. Please refer to the file LINUX_HOWTO.txt in the
Setup CD for instruction of editing source code.
10.2 My system is Mac OS, and I have installed the device driver but the
system could not identify the USB 2.0 Card Reader. What should I do?
If you are using iMac computer, please check up if you have latest update of
Mac OS and iMac Firmware update. Refer to and make certain your
Macintosh meets the requirements.
