Comsol USB 2.0 SD Card Reader User Manual Page 3
5.
Indicators
Two active LED indicators are used to display operation status of your Hi-Speed
USB Card Reader. The
Blue
LED flashing means the reader is reading or writing
data in inserted cards.
WARNING!
Do not insert or extract storage cards while the Blue LED is
flashing. Storage cards must be taken off before insertion or
removal of the card reader.
6.
Driver Installation
6.1 Windows
®
ME/2000/XP Driver Installation
6.1.1 No Driver installation is required, the Comsol USB 2.0 SD Card
Reader will function with the default drivers
6.2 Windows
®
98 Driver Installation
6.2.1 Insert
the
Comsol USB 2.0 SD Card Reader
software driver into the
CD-ROM drive and double click “
D:\UCR-05SD\driver\setup.exe”
in
the dialogue (D: represents CD-ROM)
6.2.2 Follow the instructions to complete the setup program
6.2.3 When setup is complete, restart your computer.
6.2.4 Attach the Comsol USB 2.0 SD Card Reader to an available USB port.
6.2.5 Windows will detect the Comsol USB 2.0 SD Card Reader and install
the driver automatically.
7.
Hardware Setup
7.1 Windows®
After completing device driver setup for your Comsol USB 2.0 SD Card
Reader and restarting the system, refer to following instructions to install the
reader.
7.1.1 Connect USB cable from your reader unit to available USB port of
your computer.
7.1.2 Your computer will automatically recognize the Comsol USB 2.0 SD
Card Reader and register new devices.
7.1.3 Four Removable Disk icons representing the sockets will be added
onto My Computer.
7.1.4 The installation of your Comsol USB 2.0 SD Card Reader is now
complete.
