USB 2.0 flashIT2 Flash Drive User’s Manual 5
5.2.4. When partitioning is complete, click “ok” to finish the process.
After partitioning the default password is “0000”; and memorybar.exe
is copied into the disk public area. To change the password, follow the
instructions in the “Change Password” section.
The presence of memorybar.exe allows the users to use the
application at other PCs. The memorybar.exe icon can also be found
in the USB disk public area or Window’s menu bar area.
.
Note:
If the Security Disk Size has been set to “0”, then only the public disk
will exist.
5.3 Change
Password
This option is only valid only after the security area has been defined.
The Password tab is only shown after the secured zone is created.
Password may be up to 12 characters long.
5.3.1. Double click the
icon to activate the utility
5.3.2. Select the “Password” tab
5.3.3. Enter the old password and confirm the new password.
5.3.4. Password Hint is useful if you forget your password.
5.3.5. Click “Change Password” then click “Ok” to complete the change.
