![Comset CM820V-4 User Manual Download Page 61](http://html1.mh-extra.com/html/comset/cm820v-4/cm820v-4_user-manual_2648316061.webp)
CM820V-4 User Manual
61
www.comset.com.au
Use built-in IPv6-management
: The default is checked. If IPv6 is not needed, it can be
unchecked.
Override MAC address
: Overrides LAN MAC address.
Override MTU
: Maximum Transmission Unit.
Use gateway metric
: The LAN subnet’s metric to gateway.
Bridge interfaces
: LAN bridges wired-LAN and WiFi in the same LAN subnet.
Enable STP
: Enable Spanning Tree Protocol on LAN. The default value is unchecked.
Ignore interface
: If it is unchecked, this will disable DHCP on LAN.
Start
: Lowest leased address as offset from the network address.
Limit
: Maximum number of leased addresses.
Leasetime
: Expiry time of leased addresses, minimum is 2 minutes (2m).